Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V UDIMM SuperMicro Compatible memory upgrade

SKU CH-H0YR-QECWJ

A 32 GB dual-channel DDR5 kit running at 4800 MT/s with CL40 latency and 1.1 V operation, validated for SuperMicro workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB capacity with two 16 GB modules for multitasking headroom
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • CL40 CAS latency tuned for responsive system operation
  • 10 V operating voltage for efficient power draw
  • Validated for SuperMicro MBD-C9Z790-CGW workstation boards

SuperMicro DDR5 4800 UDIMM kit

This 32 GB kit contains two 16 GB DDR5 4800 modules built for SuperMicro desktop workstations and compatible motherboards. Each stick runs at 1.10 V with CL40 latency in a 288-pin unbuffered non-ECC layout. The 1Rx8 organisation suits single-threaded workloads and standard office applications.

Sustained-load behaviour

Modules are stress-tested under load to verify stability during extended compile jobs, virtual-machine hosting or rendering queues. The 1.10 V operating point keeps thermals modest without a heat spreader, allowing continuous operation at rated 4800 MT/s inside ventilated chassis. JEDEC-standard timing prevents down-clocking when all slots are populated.

DDR5 UDIMM practical limits

The 288-pin unbuffered interface tops out at the rated 4800 MT/s on supported SuperMicro platforms; higher data rates require motherboard qualification not covered by this kit. Non-ECC layout means single-bit errors are not corrected, so workloads needing error detection should choose registered ECC alternatives. Maximum capacity per channel follows the board maker's qualified-vendor list.

Najważniejsze cechy

  • 32 GB capacity with two 16 GB modules for multitasking headroom
  • DDR5 4800 MT/s speed rated at PC5-38400 bandwidth
  • CL40 CAS latency tuned for responsive system operation
  • 10 V operating voltage for efficient power draw
  • Validated for SuperMicro MBD-C9Z790-CGW workstation boards

Specyfikacja

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How much heat and power does the 1.10 V DDR5 4800 kit draw when the workstation runs all day?

Each 16 GB module runs at the standard DDR5 voltage of 1.10 V with no heat spreader, so sustained load stays within normal JEDEC thermal limits for unbuffered UDIMMs.

What motherboard slot and chipset must I already have for this 288-pin DDR5 4800 CL40 kit to work?

You need a motherboard with 288-pin DDR5 UDIMM slots and a chipset that supports DDR5 4800 PC5-38400 non-ECC unbuffered memory, such as the Supermicro C9Z790-CGW board.

Will the 1Rx8 rank layout of these modules work alongside other DDR5 DIMMs I keep in the remaining slots?

Yes, the 1Rx8 single-rank design is compatible with mixed-rank populations on supported Supermicro boards; populate empty slots following the motherboard manual for best stability.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.