BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00275801BTC
Dostępny
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 UDIMM for ASUS ProArt X870E-CREATOR WiFi
A 32 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency, built for the ASUS ProArt X870E-CREATOR WiFi motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB total capacity from two 16 GB modules for multitasking headroom
- DDR5 5600 speed (PC5-44800) moves data faster than slower DDR5 kits
- Low 1.10 V operation reduces power draw and heat output
- CL46 latency timing supports responsive system performance
- Built with major OEM Samsung, Micron or Hynix chips for reliability
System-Specific DDR5 Kit
This 32 GB kit contains two 16 GB DDR5 modules built for the ASUS ProArt X870E-CREATOR WiFi motherboard. It delivers 5600 MT/s speed at 1.1 V with CL46 latency in a non-ECC, unbuffered UDIMM form factor. The kit targets creators and workstation users who need validated compatibility with this specific board.
CL46 CAS Latency at 5600 MT/s
The CL46 timing at the rated 5600 MT/s data rate is the key specification that determines whether this kit meets your workload requirements. Lower latency at the same speed would reduce access delay, while higher latency would increase it. Verify that your application benefits from this latency tier before purchasing.
Steady-State Operation at 1.1 V
Under sustained load the modules operate at the standard DDR5 voltage of 1.1 V without a heat spreader, relying on case airflow for thermal management. The 1Rx8 single-rank organisation helps maintain signal integrity during long sessions. Ensure your chassis provides adequate airflow over the memory slots for continuous stability.
Najważniejsze cechy
- 32 GB total capacity from two 16 GB modules for multitasking headroom
- DDR5 5600 speed (PC5-44800) moves data faster than slower DDR5 kits
- Low 1.10 V operation reduces power draw and heat output
- CL46 latency timing supports responsive system performance
- Built with major OEM Samsung, Micron or Hynix chips for reliability
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Pytania dotyczące tego produktu
What does the 5600 speed rating mean once the kit is installed in the ASUS ProArt X870E-CREATOR WiFi?
The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, delivering the rated throughput without manual tuning.
How does the 288-pin DDR5 UDIMM interface affect usable bandwidth on this motherboard?
The 288-pin DDR5 UDIMM slot provides the native DDR5 5600 data path; the kit operates at its rated 5600 MT/s within that interface.
What physical clearance does the 288-pin UDIMM kit need to fit the board?
Each 16 GB module uses the standard 288-pin DDR5 UDIMM form factor with no heat spreader, so it fits the board's DIMM slots without extra height clearance.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00278367BTC
Dostępny
