NEMIX RAM
NEMIX RAM 384GB (4×96GB) DDR5 5600 PC5-44800 CL46 2Rx4 1.1V ECC RDIMM SuperMicro B13SEG memory upgrade
384 GB DDR5-5600 ECC registered kit (4 × 96 GB, CL46, 1.1 V) validated for SuperMicro B13SEG servers
- Capacity384GB (4 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 384GB total capacity with four 96GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design protects data integrity in servers
- 1V operating voltage reduces power draw under load
- Validated for SuperMicro B13SEG motherboard compatibility
System-Specific DDR5 Memory Kit
This 384GB kit contains four 96GB registered DDR5 ECC RDIMMs built for SuperMicro B13SEG motherboards. It targets IT professionals and system integrators who need maximum registered memory capacity in a validated configuration. The modules operate at 1.1V and use 288-pin DDR5 form factor.
Registered ECC with 2Rx4 Organization
The decisive specification is the 2Rx4 registered ECC layout running at DDR5 5600 with CL46 latency. This rank and buffer combination determines whether the motherboard's memory controller can populate all four slots at the rated speed. Buyers who need unbuffered or non-ECC modules cannot use this kit.
Thermals and Power in Normal Operation
Bare modules without heat spreaders rely on chassis airflow for cooling at the standard 1.10V operating voltage. Registered buffers and ECC logic add slight power draw over unbuffered DIMMs, but the 1.1V baseline keeps thermal output predictable in typical server workloads. Noise is governed entirely by system fans.
Najważniejsze cechy
- 384GB total capacity with four 96GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered design protects data integrity in servers
- 1V operating voltage reduces power draw under load
- Validated for SuperMicro B13SEG motherboard compatibility
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 384GB (4X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Pytania dotyczące tego produktu
Will 5600 MT/s DDR5 actually run at that speed in a SuperMicro B13SEG system?
The kit is rated DDR5 5600 PC5-44800, but the motherboard's memory controller and BIOS determine the final operating frequency; it may run at 4800 MT/s or 5600 MT/s depending on the platform configuration.
Does the registered ECC design change how the 288-pin DDR5 slot is used compared to unbuffered modules?
Yes, these 288-pin RDIMMs include a register that buffers address and command signals, so the motherboard must support registered ECC DDR5; they are not interchangeable with unbuffered UDIMMs.
What clearance do the 96 GB modules need since they have no heat spreader?
The bare modules are standard-height 288-pin RDIMMs, so they fit in regular DIMM slots without extra vertical clearance; just ensure the server chassis allows full-height memory modules.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



