NEMIX RAM
NEMIX RAM 576GB (6 x 96GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade
A 576 GB registered ECC DDR5 kit in six 96 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency for high-throughput data processing
- 10 V operating voltage reduces power draw in fully populated systems
- ECC and registered design corrects single-bit errors and stabilises every slot
- 288-pin RDIMM form factor matches Supermicro H14DST-F memory requirements
Supermicro H14DST-F 576GB kit
This 576GB kit contains six 96GB DDR5 6400 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DST-F motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's DIMM slots without adapters.
Sustained load stability
Registered buffering offloads the memory controller so all six modules operate together at 6400 MT/s under continuous workloads. ECC detection and correction runs on every transaction, preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw consistent across the fully populated array.
DDR5 6400 interface limits
The PC5-51200 standard defines the maximum transfer rate and timing envelope these modules occupy. CL52 latency is the rated figure at 6400 MT/s; tighter timings are not guaranteed at this speed. Population rules in the motherboard manual determine whether all six slots can run at the rated frequency simultaneously.
Najważniejsze cechy
- 576 GB total capacity from six 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency for high-throughput data processing
- 10 V operating voltage reduces power draw in fully populated systems
- ECC and registered design corrects single-bit errors and stabilises every slot
- 288-pin RDIMM form factor matches Supermicro H14DST-F memory requirements
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Pytania dotyczące tego produktu
How much power does the 576GB kit draw at its rated 1.1V when the server runs continuously?
Each module operates at 1.10V; total power depends on the number of populated slots and the CPU memory controller load, so consult the Supermicro H14DST-F manual for platform-level figures.
What motherboard and CPU combination must I already have to install this 6 x 96GB DDR5 6400 CL52 kit?
The kit is validated for the Supermicro H14DST-F motherboard; you need a compatible CPU that supports DDR5-6400 Registered ECC RDIMMs in a six-DIMM population.
Can I mix these 2Rx4 96GB DDR5 RDIMMs with smaller-capacity DDR5 RDIMMs already present in the H14DST-F?
Mixing ranks and capacities is governed by the motherboard’s population rules; check the H14DST-F manual for supported configurations before adding this kit alongside existing modules.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



