BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280724BTC
Dostępny
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1Rx8 1.1V 288-pin UDIMM memory upgrade
DDR5 desktop memory kit supplying 64 GB across four 16 GB unbuffered UDIMMs at 4800 MT/s, CL40, 1.1 V, validated for ThinkMate workstations
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated for ThinkMate SB Grid-Standard workstation compatibility
System-Specific 64 GB DDR5 Kit
This 64 GB kit contains four 16 GB DDR5 UDIMMs built for THINKMATE SB Grid-Standard workstations. Each module runs at 4800 MT/s with CL40 latency at 1.1 V. The unbuffered, non-ECC design matches the platform's standard memory slots. IT professionals select this kit for validated compatibility in mission-critical environments.
288-Pin Unbuffered Layout
The modules use a standard 288-pin DDR5 UDIMM form factor without heat spreaders, so they fit densely populated workstation boards. Unbuffered signalling keeps the electrical path direct for the supported platform. Major OEM Samsung, Micron or Hynix chips are used throughout. Installation follows the system manual and requires no special tools.
DDR5 4800 CL40 Specification
The decisive specification is DDR5 4800 with CL40 timing at 1.1 V in a 1Rx8 organisation. This exact speed, latency, voltage and rank configuration must match the workstation's qualified memory list. Builders needing ECC, registered modules, a different data rate or a different capacity per module cannot use this kit.
Najważniejsze cechy
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL40 CAS latency with 1Rx8 single-rank organisation
- Validated for ThinkMate SB Grid-Standard workstation compatibility
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Pytania dotyczące tego produktu
What speed does the DDR5 4800 interface actually run at in this kit?
The kit operates at DDR5 4800 (PC5-38400) with CL40 latency at 1.10 V across all four modules.
Will these 288-pin UDIMMs fit the DIMM slots on my Thinkmate SB Grid-Standard workstation?
Yes, each 16 GB module is a standard 288-pin DDR5 UDIMM designed for the Thinkmate SB Grid-Standard platform.
Do I need to enable anything in the BIOS to get the full 64 GB recognised after installing the four sticks?
Install one module per channel, seat each stick until the retention clips click, then power on; the system will detect all 64 GB automatically at DDR5 4800.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00283336BTC
Dostępny
