Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green rectangular DDR5 memory module with gold contacts and black chips no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM memory upgrade

SKU CH-1T3W-CZMG4

64 GB DDR5-4800 ECC registered RDIMM for Supermicro servers, CL40 2Rx4 at 1.1 V

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity supports memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data throughput
  • ECC registered design corrects errors to protect data integrity
  • 1 V operation reduces power draw in dense configurations
  • Validated for Supermicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L

64GB DDR5 4800 ECC RDIMM

This NEMIX RAM module provides 64GB of DDR5 4800 registered ECC memory in a single 288-pin DIMM. It operates at 1.1V with CL40 latency and uses a 2Rx4 organisation built from major OEM DRAM. The module is validated for Supermicro platforms including the SuperServer SSG-521E-E1CR24H, SSG-521E-E1CR24L and X13SEDW-F motherboards.

Suited for Supermicro server upgrades only

This memory fits administrators expanding capacity in the listed Supermicro SuperServer and workstation models that accept DDR5 RDIMMs. It is not suitable for desktop motherboards, laptops or any system that requires unbuffered non-ECC modules or a different DDR generation.

Simple DIMM installation with manual reference

Installation follows standard server DIMM procedure: power down, open the chassis, align the keyed 288-pin edge connector and press until the retention clips engage. The most common issue is mixing registered ECC RDIMMs with unbuffered DIMMs or populating slots in an order the system board manual does not support, which prevents the server from posting.

Najważniejsze cechy

  • 64 GB capacity supports memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data throughput
  • ECC registered design corrects errors to protect data integrity
  • 1 V operation reduces power draw in dense configurations
  • Validated for Supermicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L

Specyfikacja

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Pytania dotyczące tego produktu

Does my Supermicro SSG-521E-E1CR24H motherboard need a specific BIOS version to run this DDR5 4800 CL40 RDIMM?

The module follows the DDR5 4800 PC5-38400 JEDEC standard, so any BIOS that supports that speed on the SSG-521E-E1CR24H will recognise it automatically.

Can I mix this 2Rx4 1.1V registered ECC module with existing 1Rx8 DDR5 RDIMMs in the same server?

Mixing ranks is possible on many Supermicro platforms, but the memory controller will run all channels at the lowest common speed and latency; check your board's population rules first.

How do I confirm the module is operating at DDR5 4800 with ECC active after installation?

Boot into the BIOS or UEFI and verify the memory speed shows 4800 MT/s, the voltage reads 1.10 V, and ECC status reports enabled or active.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.