Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 ECC Registered RDIMM CL46 2Rx4 1.1V 288-Pin Supermicro H13SSW Memory Upgrade

SKU CH-6K7Y-GDCG7

64 GB DDR5-5600 ECC registered RDIMM, 2Rx4 CL46 at 1.1 V, validated for Supermicro H13SSW servers

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

Pokaż jeszcze 24 konfiguracji
  • 64 GB DDR5 5600 registered ECC RDIMM delivers full-capacity server memory
  • CL46 latency and 1.10 V operation match the motherboard's rated timing and voltage
  • 2Rx4 registered architecture offloads the memory controller for stable fully-populated operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Verified compatible with Supermicro H13SSW 288-pin RDIMM slot requirements

Exact-Match Server Upgrade

This 64GB DDR5 5600 RDIMM is built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. Registered ECC architecture with 2Rx4 organisation allows every slot to run fully populated at rated speed. The module arrives new and ready for installation in the 288-pin sockets your board requires.

Sustained-Load Behaviour

Registered buffering offloads the memory controller so all channels remain stable when every DIMM slot is filled and the system runs continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute jobs. CL46 latency and 1.1V operation stay consistent across extended duty cycles.

Thermals and Power

Operating at 1.1V keeps power draw low even with a full 64GB kit installed. The module has no heat spreader, relying on chassis airflow for cooling in the Supermicro H13SSW environment. Low voltage and registered design together reduce thermal load on the memory subsystem during normal server operation.

Najważniejsze cechy

  • 64 GB DDR5 5600 registered ECC RDIMM delivers full-capacity server memory
  • CL46 latency and 1.10 V operation match the motherboard's rated timing and voltage
  • 2Rx4 registered architecture offloads the memory controller for stable fully-populated operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Verified compatible with Supermicro H13SSW 288-pin RDIMM slot requirements

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How much power does this 1.1V DDR5 RDIMM draw when the server runs continuously?

The module operates at 1.10V, the standard DDR5 voltage for registered ECC DIMMs, which keeps power draw low even with all slots populated on the Supermicro H13SSW.

What motherboard slot and firmware support do I need to install this 288-pin RDIMM?

You need a Supermicro H13SSW motherboard with DDR5 RDIMM slots and a BIOS that recognises 2Rx4 registered ECC modules at 5600 MT/s.

Will this 5600 MT/s registered ECC kit run reliably alongside slower DDR5 DIMMs already in my H13SSW?

The memory controller will down-clock every module to the lowest common speed and latency, so mixed speeds work but the faster kit will not run at its rated 5600 MT/s.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.