NEMIX RAM
NEMIX RAM 8GB DDR4 2400 PC4-19200 CL17 1Rx4 ECC RDIMM memory upgrade
An 8 GB DDR4 2400 registered ECC module with CL17 latency for server memory upgrades
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity in server workloads
- Registered design stabilises signal for multi-module configurations
- DDR4 2400 speed delivers 19200 MB/s bandwidth
- Low 1.20 V voltage reduces power draw per module
- 1Rx4 single-rank layout simplifies memory population rules
Capacity and role
This 8 GB DDR4 RDIMM delivers registered ECC memory for servers and workstations that require error correction and signal buffering. It operates at 2400 MT/s with a CL17 latency and a 1.2 V supply voltage. The single-rank 1Rx4 organisation suits platforms qualified for this density and timing.
Registered ECC difference
The registered buffer reduces electrical load on the memory controller, allowing larger module populations per channel. ECC circuitry detects and corrects single-bit errors, protecting data integrity in mission-critical workloads. No heat spreader is fitted, so airflow across the bare DRAM is required.
Connector and build implications
The 288-pin DDR4 RDIMM keying prevents insertion into consumer UDIMM slots, ensuring physical compatibility only with registered DIMM platforms. The module uses major OEM chips from Samsung, Micron or Hynix and is stress-tested under load. Buyers needing unbuffered non-ECC memory for desktop boards cannot use this module.
Najważniejsze cechy
- ECC protection guards data integrity in server workloads
- Registered design stabilises signal for multi-module configurations
- DDR4 2400 speed delivers 19200 MB/s bandwidth
- Low 1.20 V voltage reduces power draw per module
- 1Rx4 single-rank layout simplifies memory population rules
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-814K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory |
Pytania dotyczące tego produktu
Does the 1Rx4 DDR4 RDIMM require any periodic maintenance or component replacement during its service life?
No, the module has no moving parts or heat spreader and operates at 1.20 V; once seated in a 288-pin slot it runs without user-serviceable items for the duration of its lifetime warranty.
What limit appears first when the 8 GB ECC registered DIMM runs continuously at DDR4 2400 CL17?
The registered buffer and CL17 latency at 2400 MT/s set the throughput ceiling before thermal or power limits are reached under sustained server workloads.
How much heat and power does the 1.2 V 288-pin RDIMM produce when installed in a server running all day?
At 1.20 V the module draws minimal power and generates low heat; with no heat spreader it relies on chassis airflow, keeping noise unchanged in typical 24/7 operation.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



