NEMIX RAM
NEMIX RAM 8GB DDR4 3200 SODIMM POSIFLEX EK-1552 memory upgrade
8 GB DDR4 3200 SODIMM upgrade for POSIFLEX EK-1552 kiosks, CL22 1.20 V unbuffered non-ECC
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX EK-1552 kiosks
- DDR4 3200 speed for responsive operation
- 8 GB capacity in single module
- Low 1.2 V voltage reduces power draw
- 260-pin SODIMM fits standard laptop slots
System-specific SODIMM for POS kiosks
This 8 GB DDR4 module is built for the Posiflex EK-1552 Mercury Series kiosk. It delivers a straightforward memory upgrade for point-of-sale terminals that need additional capacity. The single stick format suits systems with limited slot availability.
JEDEC-standard build with 260-pin layout
The unbuffered, non-ECC design operates at 1.20 V with CL22 timings. Major OEM chips from Samsung, Micron or Hynix are used throughout. The 260-pin SODIMM edge connector matches the factory memory slot without adapters or modifications.
Verify slot count and maximum capacity first
Confirm the kiosk accepts a 2Rx8 3200 MT/s module before ordering. Some compact terminals restrict total memory or rank configuration. Check the service manual for the exact limit and available sockets.
Najważniejsze cechy
- Designed for POSIFLEX EK-1552 kiosks
- DDR4 3200 speed for responsive operation
- 8 GB capacity in single module
- Low 1.2 V voltage reduces power draw
- 260-pin SODIMM fits standard laptop slots
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Pytania dotyczące tego produktu
Does the DDR4 3200 SODIMM run at its rated PC4-25600 speed on the POSIFLEX EK-1552?
The module is rated DDR4 3200 PC4-25600; actual speed depends on the kiosk's memory controller and BIOS settings.
Will the 260-pin SODIMM fit the memory slot in the POSIFLEX EK-1552 kiosk?
Yes, the 260-pin DDR4 SODIMM form factor matches the slot used in the POSIFLEX EK-1552 Mercury Series kiosk.
How do I install this SODIMM in the POSIFLEX EK-1552, and what step is often missed?
Power off the kiosk, open the memory cover, insert the module at an angle until the contacts seat, then press down until the retention clips click; the missed step is fully pressing down until both clips lock.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



