Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5-5600 ECC SODIMM CL46 1.1V 2Rx8 262-pin memory upgrade for Supermicro X14SAV-LVDS

SKU CH-95TV-7W6JD

96 GB dual-rank DDR5 ECC SODIMM kit (2 × 48 GB) running at 5600 MT/s CL46 and 1.1 V, validated for the Supermicro X14SAV-LVDS motherboard

  • Capacity96GB (2 x 48GB)
  • Type262-Pin DDR5 ECC SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

  • 96 GB total capacity across two 48 GB modules for maximum system memory
  • DDR5-5600 speed with PC5-44800 bandwidth for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V for efficient low-power operation
  • 262-pin SODIMM form factor built for Supermicro X14SAV-LVDS compatibility

Exact-match DDR5 ECC SODIMM kit

This 96GB kit delivers two 48GB modules built to the DDR5-5600 standard with ECC protection and a CL46 latency at 1.1V. The 262-pin unbuffered SODIMM form factor matches the slot layout required by the Supermicro X14SAV-LVDS motherboard so the firmware recognises the full capacity at rated speed.

Upgrade from smaller or non-ECC modules

Replacing lower-capacity sticks or non-ECC memory with this 2Rx8 kit adds error correction that stops silent data corruption and removes the capacity ceiling that limits multitasking or virtualisation workloads. The jump is worth it when your current configuration cannot hold the working set or lacks the reliability needed for continuous operation.

Fits Supermicro X14SAV-LVDS memory rules

Installation follows the board's population order and maximum supported capacity, so consult the system manual before seating the modules. The kit uses major OEM Samsung, Micron or Hynix components and requires no heat spreader clearance, freeing the surrounding area for airflow or adjacent components.

Najważniejsze cechy

  • 96 GB total capacity across two 48 GB modules for maximum system memory
  • DDR5-5600 speed with PC5-44800 bandwidth for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V for efficient low-power operation
  • 262-pin SODIMM form factor built for Supermicro X14SAV-LVDS compatibility

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered SODIMM Memory
Part NumberMSE44800-4828K2
Capacity96GB (2 x 48GB)
Type262-Pin DDR5 ECC SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered SODIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN ECC SODIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 262-pin SODIMM modules fit the Supermicro X14SAV-LVDS motherboard slots?

Yes, the kit uses the 262-pin DDR5 SODIMM form factor required by the X14SAV-LVDS; it is not a full-size UDIMM or RDIMM.

What is the correct installation order for the two 48 GB modules on the X14SAV-LVDS?

Consult the system manual for the approved population sequence; the board's memory-controller rules dictate which slot must be filled first.

Does the ECC function require any software setup after the modules are seated?

No, ECC operates automatically at the hardware level once the 1.1 V DDR5-5600 CL46 modules are recognised by the BIOS.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.