Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Compatible memory upgrade

SKU CH-00Y2-0DAYQ

Sixteen-gigabyte registered DDR5 modules with ECC, totalling 96 GB at 4800 MT/s CL40 for SuperMicro servers

  • Capacity96GB (6 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96GB total capacity across six 16GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered RDIMM for server data integrity
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEM-F and SYS-211E systems

96GB DDR5 ECC RDIMM kit

This 96GB kit contains six 16GB DDR5 4800 registered DIMMs built for Supermicro servers and workstations. ECC and registered operation protect data integrity in multi-socket and virtualization workloads. The modules run at 1.10V with CL40 latency.

Registered 288-pin design

Registered buffering reduces electrical load on the memory controller, allowing full population of all slots in supported Supermicro platforms such as the SYS-211E-FRN2T and X13SEM-F. The bare 288-pin PCB has no heat spreader, so airflow across the modules must be provided by the chassis.

DDR5 4800 bandwidth ceiling

At PC5-38400 the peak transfer rate is fixed by the JEDEC DDR5 4800 standard, limiting throughput compared with faster DDR5 bins. CL40 latency is the baseline for this speed grade and cannot be tightened without modules rated for higher data rates.

Najważniejsze cechy

  • 96GB total capacity across six 16GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered RDIMM for server data integrity
  • CL40 latency at 1.1V operating voltage
  • Validated for SuperMicro X13SEM-F and SYS-211E systems

Specyfikacja

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (6X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Pytania dotyczące tego produktu

What speed and latency does the DDR5 4800 CL40 kit run at?

The kit operates at DDR5 4800 MT/s with a CAS latency of CL40, delivering PC5-38400 bandwidth.

Does the 288-pin RDIMM fit standard DDR5 server slots?

Yes, each 16 GB module uses the 288-pin DDR5 RDIMM form factor and 1.1 V, matching registered server DIMM sockets.

How do I install the six modules in a SuperMicro X13SEM-F system?

Populate all six channels following the motherboard manual channel order; the common mistake is skipping a channel or mixing ranks.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.