Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 256GB (8 x 32GB) 5600MHz CL46 ECC Registered RDIMM Supermicro H13SRH memory upgrade

SKU CH-MEJW-XT9NJ

Eight 32 GB DDR5 RDIMMs deliver 256 GB of registered ECC memory at 5600 MHz CL46 for the Supermicro H13SRH

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Pokaż jeszcze 18 konfiguracji

Speed 5600MHz

  • 256 GB total capacity in an 8 × 32 GB kit for dense server workloads
  • DDR5 5600 MT/s (PC5-44800) rated speed for high throughput
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • CL46 latency at 1.10 V for stable operation across all populated slots
  • Verified compatibility with the Supermicro H13SRH motherboard using 288-pin RDIMM form factor

What this kit is and who uses it

This NEMIX RAM kit provides 256GB of DDR5 memory across eight 32GB RDIMM modules rated at 5600MHz with CL46 latency. It is built for administrators upgrading a Supermicro H13SRH motherboard that requires registered ECC modules in a fully populated configuration.

Suitable builds and mismatched needs

The kit suits servers that mandate 288-pin registered ECC DDR5 at 1.1V and 2Rx8 organization. It will not work for systems that accept only unbuffered UDIMMs, SODIMM form factors, or non-ECC memory, nor for boards limited to lower maximum capacities or different voltage requirements.

The spec that decides fit

The motherboard must support 288-pin DDR5 RDIMM modules at 5600MHz (PC5-44800) with CL46 timing, 1.1V operation, and 2Rx8 registered ECC architecture; otherwise the modules will not be recognized or will run at reduced stability.

Najważniejsze cechy

  • 256 GB total capacity in an 8 × 32 GB kit for dense server workloads
  • DDR5 5600 MT/s (PC5-44800) rated speed for high throughput
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • CL46 latency at 1.10 V for stable operation across all populated slots
  • Verified compatibility with the Supermicro H13SRH motherboard using 288-pin RDIMM form factor

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What motherboard and DDR generation must I already have for this 256GB DDR5 5600MHz CL46 ECC Registered RDIMM kit to work?

You need a Supermicro H13SRH motherboard with DDR5 memory slots; the kit is an exact-match upgrade validated for that board's 288-pin RDIMM population rules.

Can I mix these 2Rx8 1.1V CL46 registered modules with older DDR5 RDIMMs of different rank or timing in the same H13SRH system?

Mixing ranks, voltages or CAS latencies is not recommended; the H13SRH memory controller expects identical 2Rx8 1.1V CL46 modules in every populated slot for stable full-capacity operation.

How do I confirm the kit is running at 5600MHz with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool such as dmidecode; verify the reported speed shows 5600 MT/s, the module type reads Registered ECC, and total capacity reads 256GB across all eight slots.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.