Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders, 288-pin edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (8x16GB) CL46 1.1V ECC RDIMM GIGABYTE MS34-CP0 memory upgrade

SKU CH-9XAQ-PHQTM

Eight-module 128 GB DDR5 kit with ECC and registered buffering for the GIGABYTE MS34-CP0 motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Pokaż jeszcze 18 konfiguracji
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 exactly

Precise DDR5-5600 ECC RDIMM kit

This NEMIX RAM kit delivers 128 GB across eight 16 GB DDR5-5600 modules rated at PC5-44800. Each 288-pin RDIMM operates at 1.1 V with CL46 latency and registered ECC architecture for server-grade reliability. The kit is verified for the GIGABYTE MS34-CP0 motherboard.

Suited for full-capacity server upgrades

Administrators populating every slot on a compatible Gigabyte board will benefit from the registered buffer and on-die ECC that maintain stability at maximum density. Builders needing unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for consumer platforms cannot use this kit.

Steady throughput under sustained load

Registered buffering reduces electrical load on the memory controller, allowing all eight ranks to run continuously at the rated 5600 MT/s without throttling. ECC corrects single-bit errors in real time, preventing silent data corruption during extended compute or virtualization workloads.

Najważniejsze cechy

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Do I need a GIGABYTE MS34-CP0 motherboard for this 128GB 8x16GB DDR5 5600 CL46 1.1V ECC RDIMM kit to work?

Yes, this exact-match kit is validated for the GIGABYTE MS34-CP0 motherboard. It uses the 288-pin Registered RDIMM form factor and 1Rx8 rank configuration that this board requires for full 128GB capacity at DDR5-5600 speeds.

Will these 1.1V CL46 1Rx8 Registered ECC DDR5 modules run alongside any existing RDIMMs already installed in the server?

The kit is specified for the MS34-CP0 population rules. Mixing registered ECC modules with different ranks, voltages or timings can prevent full-capacity operation, so install all eight 16GB modules together per the motherboard manual.

How do I confirm the kit is running at DDR5 5600 PC5-44800 CL46 after installation?

Check the BIOS memory information or OS tools such as dmidecode; they should report 128GB total, DDR5-5600 speed, PC5-44800 data rate, CL46 latency, 1.1V voltage and Registered ECC status for each of the eight 1Rx8 DIMMs.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.