Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 6400 512GB (4x128GB) CL52 4Rx4 ECC Registered RDIMM Supermicro X14SDW-72C-SP9F memory upgrade

SKU CH-92VZ-KC7Q3

A 512 GB DDR5 server memory kit with four 128 GB registered ECC modules running at 6400 MHz, CL52 and 1.1 V, validated for the Supermicro X14SDW-72C-SP9F motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Pokaż jeszcze 4 konfiguracji
  • 512 GB total capacity from four 128 GB modules maximises server memory density
  • DDR5-6400 speed with CL52 latency delivers rated throughput for the platform
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 4Rx4 rank matches the motherboard's electrical requirements exactly
  • Validated for the Supermicro X14SDW-72C-SP9F to ensure full-slot recognition at rated speed

Exact-match DDR5 server kit

This 512 GB kit contains four 128 GB DDR5 RDIMMs rated at 6400 MT/s (PC5-51200) with CL52 latency and 1.1 V operation. Each module is a 4Rx4 registered ECC DIMM built on major-brand DRAM and validated for the Supermicro X14SDW-72C-SP9F motherboard.

Suits Supermicro X14SDW-72C-SP9F builds

System integrators and IT teams populating every slot on this specific Supermicro board get full-capacity recognition and rated speed without manual tuning. Builders using consumer boards, UDIMM-only platforms, or systems that do not support registered ECC memory should select a different kit.

Install like standard RDIMMs

Insert the 288-pin modules into the slots specified by the motherboard manual, observing the recommended population order for four DIMMs. The most common issue is skipping the manual's slot sequence, which can prevent the system from booting or recognising the full 512 GB capacity.

Najważniejsze cechy

  • 512 GB total capacity from four 128 GB modules maximises server memory density
  • DDR5-6400 speed with CL52 latency delivers rated throughput for the platform
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 4Rx4 rank matches the motherboard's electrical requirements exactly
  • Validated for the Supermicro X14SDW-72C-SP9F to ensure full-slot recognition at rated speed

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What motherboard must I already have for this 512GB DDR5 6400 kit to be recognised at full capacity?

The kit is validated for the Supermicro X14SDW-72C-SP9F motherboard running DDR5 6400 PC5-51200, so that board is required for the guaranteed fit.

Will these 4Rx4 registered ECC RDIMMs work if I keep older DDR5 modules in the remaining slots?

Mixing ranks or registered with unbuffered DIMMs is not supported; the board expects identical 4Rx4 registered ECC modules in every populated slot for stable operation.

How can I confirm the 1.1V CL52 modules are running at the rated 6400 speed after installation?

Check the BIOS memory information or a tool such as dmidecode — it should report DDR5 6400, CL52, 1.1 V and 512 GB total across the four slots.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.