Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 64GB 2x32GB 6400MHz CL52 2Rx4 ECC Registered RDIMM Supermicro X14SRA-F memory upgrade

SKU CH-3W32-F72ZE

A 64 GB DDR5 kit of two 32 GB registered ECC RDIMMs at 6400 MHz CL52, validated for the Supermicro X14SRA-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Pokaż jeszcze 4 konfiguracji
  • 64GB total capacity from two matched 32GB modules for full-channel bandwidth
  • DDR5-6400 speed with CL52 latency runs at the board's rated frequency
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1V operating voltage matches the server platform's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-F memory slots exactly

System-specific DDR5 RDIMM kit

This 64 GB kit contains two 32 GB DDR5 6400 MHz registered ECC RDIMMs built for the Supermicro X14SRA-F motherboard. The modules run at 1.1 V with CL52 latency and use a 2Rx4 organisation across 288 pins.

Registered ECC with 2Rx4 rank

The single specification that decides fitment is the registered ECC RDIMM format with 2Rx4 ranking at DDR5 6400 speed. Only motherboards that explicitly support this exact rank, voltage and timing will recognise the full capacity and operate at the rated frequency.

Suited for Supermicro X14SRA-F upgrades

This kit suits administrators upgrading a Supermicro X14SRA-F that requires registered ECC DDR5 RDIMMs populated per the board's memory rules. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules or a different rank configuration should look at other memory types.

Najważniejsze cechy

  • 64GB total capacity from two matched 32GB modules for full-channel bandwidth
  • DDR5-6400 speed with CL52 latency runs at the board's rated frequency
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1V operating voltage matches the server platform's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-F memory slots exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What does the DDR5-6400 speed rating mean once the modules are installed in a Supermicro X14SRA-F?

The kit runs at 6400 MT/s with CL52 latency at 1.1 V, delivering the exact data rate and timing the X14SRA-F memory controller expects for full-capacity operation.

How does the PC5-51200 designation and registered ECC design affect usable bandwidth and error handling?

PC5-51200 matches the DDR5-6400 transfer rate; the registered buffer reduces electrical load on the controller so all slots can run at that speed, while ECC corrects single-bit errors on the fly.

What physical requirements must the chassis and motherboard meet to accept this 288-pin RDIMM kit?

The motherboard needs DDR5 RDIMM slots wired for 288-pin registered modules; the kit contains two 32 GB sticks with no heat spreader, so standard RDIMM clearance applies.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.