Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black square 80mm cooling fan with three-wire connector

OEM Industries

OEM Industries 109R0812S4D01 80mm CPU cooler

SKU CH-S7S0-FBDR1

80 mm square fan spins at 12 V with a 3-pin connector for direct motherboard control

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power Connector3 Pin
  • LEDNo
  • SANYO 80mm fan delivers targeted CPU cooling
  • 12V 0.24A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • 80x25mm frame fits tight chassis spaces
  • Black finish matches standard build aesthetics

80mm SANYO cooling fan

The OEM Industries 109R0812S4D01 is an 80mm square fan built by SANYO for case or CPU airflow. It runs on 12 volts and draws 0.24 amps through a standard three-pin connector. The black frame measures 80 by 25 millimetres and carries no LED lighting. This unit is sold new as a fan only, without heatsink or mounting hardware.

Fits three-pin headers and 80mm mounts

The three-pin power connector plugs directly into motherboard fan headers or fan controllers that supply 12 volts. Because the frame is exactly 80 by 25 millimetres, it matches any chassis or cooler bracket cut for the 8025 form factor. No additional adapters or soldered connections are required, and the low current draw leaves ample headroom on shared fan headers. The fan-only design frees the builder to pair it with any compatible heatsink or use it as a standalone intake or exhaust.

Suits builders replacing an 80mm three-pin fan

This model suits anyone needing a direct 80mm replacement with a three-pin 12-volt interface and no lighting. Builders who require PWM speed control, larger diameters, integrated heatsinks or RGB illumination should look at other products. The package contains only the fan itself, so systems that expect bundled mounting clips or thermal paste will need those sourced separately.

Najważniejsze cechy

  • SANYO 80mm fan delivers targeted CPU cooling
  • 12V 0.24A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • 80x25mm frame fits tight chassis spaces
  • Black finish matches standard build aesthetics

Specyfikacja

Model109R0812S4D01
ColorBlack
TypeFan only
Fan Size80mm
Power Connector3 Pin
LEDNo

Pytania dotyczące tego produktu

How much current does the 12V 109R0812S4D01 fan draw under continuous load?

The fan is rated at 12V 0.24A, so it draws 0.24 amps when running at full speed.

What noise and heat should I expect from the 8025 fan running all day?

The 80mm SANYO 8025 fan moves air steadily at its rated 12V 0.24A; actual noise and case temperature depend on your chassis airflow and ambient conditions.

Which motherboard header do I need for the 3-wire connector on this cooler?

A standard 3-pin 12V fan header on the motherboard is required to power and monitor the 109R0812S4D01 fan.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.