Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 50mm square cooling fan with three-pin connector

OEM Industries

OEM Industries 2106KL-04W-B39 50mm 15mm 3-pin CPU cooler

SKU CH-82J9-48CR6

A 50 mm square fan with ball bearing, 12 V 0.1 A draw and a 3-pin connector for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 50 mm frame fits tight builds
  • Ball bearing motor reduces friction wear
  • 12 V 0.1 A draw keeps power low
  • Three-pin connector enables speed monitoring
  • Black finish suits clean aesthetics

Compact 50mm Fan for Tight Builds

This 50mm square cooler from NMB suits small-form-factor systems and embedded boards where height is restricted. The 15mm profile and three-pin connector fit standard headers without adapters. It is not for builders who need higher airflow or larger heatsink clearance.

Straightforward Three-Pin Install

The 3-pin power connector plugs directly into most motherboard or controller headers. Ball bearing construction reduces the risk of sleeve wear over time. No LED wiring or PWM cable is present, so speed control depends on voltage regulation. Misaligned mounting holes are the usual issue when brackets differ from the 50mm pattern.

12V 0.1A Draw Defines Compatibility

The cooler draws 0.1A at 12V, a figure that determines whether a given header or fan controller can supply enough current. Exceeding the header rating can cause instability or shutdown. Check the board specification against this draw before fitting.

Najważniejsze cechy

  • Compact 50 mm frame fits tight builds
  • Ball bearing motor reduces friction wear
  • 12 V 0.1 A draw keeps power low
  • Three-pin connector enables speed monitoring
  • Black finish suits clean aesthetics

Specyfikacja

Model2106KL-04W-B39
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Pytania dotyczące tego produktu

How can I confirm the 2106KL-04W-B39 fan is spinning correctly after connecting the 3-pin header?

Check that the fan blades rotate steadily and listen for smooth ball-bearing operation; the 12 V, 0.1 A rating means it should start immediately when the motherboard supplies power.

What comes in the box with the NMB 5015 cooler and what extra parts are needed?

The package contains the 50 mm square fan with a 3-wire 3-pin connector; no mounting brackets, screws or thermal paste are included, so you must supply those separately.

Which version of the 50 mm 15 mm cooler should I choose for a standard 3-pin CPU header?

The 2106KL-04W-B39 model is the only version listed; it matches a 12 V, 0.1 A, 3-pin header directly, so no alternative capacity or voltage option is required.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.