Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 120mm square frame fan with four-wire connector

OEM Industries

OEM Industries 4715KL-04W-B86 120mm 4-pin CPU cooler

SKU CH-27AK-7KKKK MPN 4715KL-04W-B86

120 mm dual-ball-bearing fan with 4-pin PWM control spins 1,500–7,800 rpm at 20–75 dB for Dell server cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • LEDNo
  • High airflow from 1500 to 7800 rpm speed range
  • Precise thermal control via 4-pin PWM connector
  • Quiet operation at 20 dB minimum noise level
  • Long service life rated at 50000 hours
  • Reliable dual ball bearing design for durability

Dell server replacement fan

This 120 mm DC fan is built for Dell servers that require the 4715KL-04W-B86 model. It delivers 12 V operation at 2.50 A through a four-pin connector designed for temperature-controlled speed regulation. The double ball bearing supports a speed range from 1500 rpm up to 7800 rpm. Noise output spans 20 dB at low speed to 75 dB at maximum. Rated life is 50000 hours.

Check connector and clearance before ordering

Verify that your server chassis accepts a 12038 form-factor fan with a four-wire PWM interface keyed for Dell pinouts. Confirm the mounting hole pattern matches the 120 mm spacing used in the target Dell model. Ensure the system fan header can supply 12 V at 2.50 A without current limiting. No LED lighting is present, so the unit will not add visual indication.

Replaces worn or failed OEM Dell cooler

This unit directly substitutes the original NMB 4715KL-04W-B86 when bearings degrade or airflow drops below specification. The upgrade is worthwhile when the existing fan reaches end of life or runs at 75 dB under load. It is not suited for builds needing a heatsink assembly, liquid cooling integration, or standard consumer motherboard headers.

Najważniejsze cechy

  • High airflow from 1500 to 7800 rpm speed range
  • Precise thermal control via 4-pin PWM connector
  • Quiet operation at 20 dB minimum noise level
  • Long service life rated at 50000 hours
  • Reliable dual ball bearing design for durability

Specyfikacja

Model4715KL-04W-B86
ColorBlack
TypeFan only
Fan Size120mm
Bearing Type2 Ball
Power Connector4 Pin
LEDNo

Pytania dotyczące tego produktu

Does the 4715KL-04W-B86 ship with mounting hardware or just the 120mm fan unit?

The product is listed as fan only, so only the 120mm 4-pin fan is included; any brackets or screws for a specific Dell server must be sourced separately.

Which speed range suits a quiet Dell server versus a high-airflow build using this 1500-7800 rpm fan?

At 1500 rpm the noise is near 20 dB for quiet operation; at 7800 rpm it reaches 75 dB for maximum airflow, so choose the lower end for silence and the upper end for cooling headroom.

What does the 2.50 A current draw mean for a Dell server 12 V 4-pin header?

The fan draws 2.50 A at 12 V, so the server's 4-pin temperature-control header must be rated for at least that current to run the fan at its full 7800 rpm speed.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.