Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small black 50mm blower fan with three wires

OEM Industries

OEM Industries NIDEC 5015 D05F-12PM 50mm Blower Fan 12V 0.09A 3-Wire

SKU CH-X1MW-KXXYJ

A 50 mm blower fan with ball bearing runs on 12 V and uses a 3-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • LEDNo
  • Compact blower design directs airflow through tight spaces
  • NIDEC motor ensures reliable long-term operation
  • 12 V 0.09 A keeps power draw low
  • 50 mm by 15 mm frame fits small-form-factor builds
  • Three-wire connection enables speed monitoring

Compact 50mm blower for tight builds

The OEM Industries NIDEC 5015 D05F-12PM is a 50mm blower fan designed for compact CPU air coolers and small-form-factor systems. It runs on 12V and draws 0.09A through a standard 3-wire connection. The black frame and ball bearing suit continuous operation in space-constrained chassis.

Focused airflow with limited headroom

The blower layout pushes air directly through a heatsink rather than across it, which helps in narrow ducts where axial fans stall. At 50mm diameter and 15mm thickness the fan fits slim coolers, but the modest current draw limits static pressure for dense fin stacks. It handles light thermal loads; heavier loads will exceed its capacity.

Drops into 50mm mounts with three-wire control

The unit needs a 50mm mounting pattern and a 3-pin header supplying 12V. No LED or PWM circuitry is present, so speed control relies on voltage regulation from the motherboard or a fan controller. The ball bearing reduces maintenance compared with sleeve types, freeing the builder from frequent replacement cycles in always-on systems.

Najważniejsze cechy

  • Compact blower design directs airflow through tight spaces
  • NIDEC motor ensures reliable long-term operation
  • 12 V 0.09 A keeps power draw low
  • 50 mm by 15 mm frame fits small-form-factor builds
  • Three-wire connection enables speed monitoring

Specyfikacja

ModelD05F-12PM
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
LEDNo

Pytania dotyczące tego produktu

Will the 50 mm blower fan with 3-wire connector fit a 12 V header on my existing motherboard?

Yes, the fan runs on 12 V and draws 0.09 A, so it will operate from any standard 3-pin or 4-pin 12 V fan header on your current board.

How can I confirm the D05F-12PM is spinning correctly once installed?

Connect the 3-wire lead to a fan header, power on the system, and verify RPM reporting in BIOS or monitoring software; the ball bearing should run smoothly without audible rattle.

Does the package include only the 5015 blower fan or are mounting screws and a power adapter also supplied?

The listing specifies "Fan only", so you receive the 50 mm blower unit itself; any mounting screws or adapters must be sourced separately.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.