Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

OEM Industries

OEM Industries SJ80025HA1 8025 110~120V AC 50/60Hz 2 Wires Ball Bearing CPU cooler

SKU CH-KHBS-TBRS6 MPN SJ80025HA1

An 80 mm ball-bearing fan with a metal frame, running on 110–120 V AC at 50/60 Hz via a two-wire lead

  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • LEDNo
  • 80 mm metal-frame fan fits tight CPU cooler slots
  • Dual ball bearings extend operating life over sleeve designs
  • 110–120 V AC input powers directly from mains supply
  • 50/60 Hz compatibility suits global grid frequencies
  • Two-wire lead simplifies installation without PWM complexity

OEM Industries 80 mm AC Fan

The OEM Industries SJ80025HA1 is an 80 mm frame fan that runs directly from 110–120 V AC mains at 50 or 60 Hz. It uses a two-wire lead and a metal frame, so it suits equipment that already provides line-voltage power. Builders needing a PWM or voltage-controlled DC fan should choose a different model.

Sustained Operation With Ball Bearings

Dual ball bearings give the fan a predictable wear pattern during continuous duty, avoiding the friction increase that sleeve bearings show after long runs. The metal frame keeps blade-to-housing clearance stable when the ambient temperature rises. No speed-control signal is present, so airflow stays constant from start to finish.

110–120 V AC Two-Wire Connection

The sole deciding specification is the 110–120 V AC rating with a two-wire connector; the fan cannot be powered from a standard motherboard header or a 12 V DC supply. Verify that your chassis or industrial enclosure provides exactly this mains voltage before ordering.

Najważniejsze cechy

  • 80 mm metal-frame fan fits tight CPU cooler slots
  • Dual ball bearings extend operating life over sleeve designs
  • 110–120 V AC input powers directly from mains supply
  • 50/60 Hz compatibility suits global grid frequencies
  • Two-wire lead simplifies installation without PWM complexity

Specyfikacja

ModelSJ80025HA1
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector2 Wires
LEDNo

Pytania dotyczące tego produktu

How much heat does the SJ80025HA1 generate when running continuously on 120 V AC?

The fan draws power directly from 110–120 V AC at 50/60 Hz with a two-wire lead, so its heat output is tied to that mains supply rather than a low-voltage rail.

What mounting hardware must I already have to install this 80 mm metal-frame fan?

You need an 80 mm mounting pattern — four screw holes spaced for 80*80*25 mm — plus access to a 110–120 V AC source; no low-voltage header or adapter is included.

Will the two-wire AC lead on this 8025 fan work alongside a modern motherboard PWM header?

No, the SJ80025HA1 uses a fixed-voltage 110–120 V AC two-wire connection and has no PWM or tach signal, so it cannot plug into a standard 4-pin CPU fan header.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.