Orico
Orico 2.5" USB 3.0 SATA Enclosure Clear 5 Pack 2139U3
- Transparent Clear
- 2.5"
22,99 USD
0.00028648BTC
Dostępny
Orico
Orico 2139U3 2.5" SATA drive enclosure 2-pack clear
Two-pack of tool-free 2.5″ SATA enclosures with transparent cases, USB 3.0 at 5 Gbps and UASP support for drives up to 6 TB each
- ColorTransparent Clear
- Size2.5"
- TypeEnclosure
- MaterialPlastic
- Internal InterfaceSATA I/II/III
- External InterfaceUSB 3.0
External Interface USB 3.0
- USB 3.0
- USB 3.1
Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.
Model 2 Packs
- USB Adapter
- 2 Packs
- 5 Packs
Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.
- Tool-free installation lets you swap drives in seconds
- USB 3.0 interface delivers up to 5 Gbps theoretical transfer speed
- Transparent casing shows which drive is installed at a glance
- Supports 7 mm and 9.5 mm 2.5 inch SATA drives up to 6 TB
- Two enclosures included for multiple backup or storage projects
Two-pack clear 2.5" SATA enclosures
This two-pack provides transparent USB 3.0 enclosures for 2.5 inch SATA hard drives and solid-state drives. Each unit accepts a single drive up to 9.5 mm thick and draws power directly from the USB port. The clear casing lets you identify the installed drive at a glance. Home users and technicians can quickly turn spare internal drives into portable storage.
Tool-free single-drive bays with UASP
Each enclosure holds one 2.5 inch SATA I/II/III drive with a maximum capacity of 6 TB per bay. The USB 3.0 Micro-B interface delivers a theoretical 5 Gbps transfer rate and supports the UASP protocol for lower latency. Drives thicker than 9.5 mm, such as 12.5 mm models, are not recommended for these bays.
Slide-in installation with hot-swap support
Installation requires no tools: open the case, insert the drive, and close the latch. The enclosures are hot-swappable and work plug-and-play with Windows, Linux and Mac OS without additional drivers. An LED indicator shows power and activity status. The only common issue is attempting to fit a 12.5 mm drive, which will not seat properly in the bay.
Najważniejsze cechy
- Tool-free installation lets you swap drives in seconds
- USB 3.0 interface delivers up to 5 Gbps theoretical transfer speed
- Transparent casing shows which drive is installed at a glance
- Supports 7 mm and 9.5 mm 2.5 inch SATA drives up to 6 TB
- Two enclosures included for multiple backup or storage projects
Specyfikacja
| Brand | ORICO |
|---|---|
| Color | Transparent Clear |
| Size | 2.5" |
| Type | Enclosure |
| Material | Plastic |
| Internal Interface | SATA I/II/III |
| External Interface | USB 3.0 |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 Bay |
| Maximum Capacity (per Bay) | Up to 6TB |
| Power | No |
Inne wersje tego modelu
Jeszcze 1 w tej samej serii
Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.
Pytania dotyczące tego produktu
What does the 5 Gbps USB 3.0 rating mean once the enclosure is connected to a real computer?
The 5 Gbps figure is the theoretical bus ceiling; actual throughput depends on the host controller, cable quality and the drive’s own SATA I/II/III speed limit, so sustained copies will be lower.
How does the USB 3.0 Micro-B interface cap performance in practice?
The Micro-B port runs at USB 3.0 SuperSpeed 5 Gbps and supports UASP, so the enclosure cannot exceed that bandwidth even if the internal SATA III drive is faster.
What drive thicknesses and lengths fit inside the clear plastic shell?
The tray accepts 2.5 inch SATA HDDs or SSDs that are 7 mm or 9.5 mm thick; 12.5 mm drives are not recommended and will not seat properly.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
