Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 260-Pin SODIMM memory upgrade

SKU CH-82J1-4TV8V

16 GB DDR4 2666 MHz CL19 SODIMM for Dell OptiPlex 3060, 3070, 5060, 5070 Micro and 5260 AIO

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB capacity adds headroom for multitasking
  • DDR4 2666MHz CL19 speed matches system specs
  • 2V low voltage reduces power draw
  • 260-pin SODIMM fits Dell OptiPlex Micro and AIO slots
  • JEDEC and RoHS compliant for warranty-safe upgrade

16 GB DDR4 SODIMM for Dell OptiPlex Micro and AIO

This 16 GB DDR4 2666 MHz module upgrades compatible Dell OptiPlex 3060 Micro, 3070 Micro, 5060 Micro, 5070 Micro and 5260 AIO systems. It uses a 260-pin SO-DIMM form factor, runs at 1.2 V and meets JEDEC PC4-21300 CL19 specifications. The unbuffered non-ECC design installs without tools in the single memory slot of these compact PCs.

Who this suits and who should look elsewhere

Builders upgrading the listed OptiPlex Micro or AIO models gain a straightforward capacity increase. Buyers needing ECC error correction, registered modules, higher speeds than 2666 MHz or a different pin count cannot use this part. Systems outside the five named Dell models may not accept this specific module.

260-pin DDR4 2666 MHz CL19 specification

The decisive specification is the 260-pin DDR4 2666 MHz CL19 interface; only platforms designed for this exact SO-DIMM type will recognise the module. Compatibility is limited to the Dell OptiPlex 3060 Micro, 3070 Micro, 5060 Micro, 5070 Micro and 5260 AIO. Verification against the system service manual is required before purchase.

Najważniejsze cechy

  • 16GB capacity adds headroom for multitasking
  • DDR4 2666MHz CL19 speed matches system specs
  • 2V low voltage reduces power draw
  • 260-pin SODIMM fits Dell OptiPlex Micro and AIO slots
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specyfikacja

BrandOWC
Part Number2S6D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3060 Micro
Dell OptiPlex 3070 Micro
Dell OptiPlex 5060 Micro
Dell OptiPlex 5070 Micro
Dell OptiPlex 5260 AIO

Pytania dotyczące tego produktu

What DDR4 speed does the PC4-21300 2666MHz rating cap at in a Dell OptiPlex 5070 Micro?

The module runs at 2666MHz CL19 at 1.2V and will down-clock to 2400MHz or 2133MHz if the system requires it.

Will the 260-pin SODIMM fit the single memory slot inside a Dell OptiPlex 3060 Micro?

Yes, the 260-pin unbuffered non-ECC SODIMM matches the sole DDR4 SO-DIMM slot in the 3060 Micro and other listed OptiPlex Micro and AIO models.

What is the correct way to seat the module so the retention clips lock on a Dell OptiPlex 5260 AIO?

Insert the SODIMM at roughly a 30-degree angle until the gold contacts disappear, then press down firmly until both side clips snap into the notches.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.