Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green printed circuit board with black memory chips, gold edge connectors, no heat spreader

OWC

OWC 32GB DDR4 2666MHz CL19 1.2V UDIMM Dell OptiPlex 3080 3090 XE3

SKU CH-GMWZ-SQD1J

32 GB DDR4 2666 MHz CL19 UDIMM for Dell OptiPlex 3080, 3090 and XE3 systems

  • Capacity32GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 32 GB capacity handles large files and multitasking
  • 2666 MHz DDR4 speed matches OptiPlex 3080 and 3090 specs
  • CL19 latency and 1.2 V voltage meet JEDEC standard
  • 288-pin unbuffered non-ECC UDIMM fits desktop DIMM slots
  • Backward compatible with 2133 MHz and 2400 MHz systems

32GB DDR4 UDIMM for Dell OptiPlex

This 32GB DDR4 2666MHz CL19 module is built for Dell OptiPlex 3080 SFF, 3080 Tower, 3090 SFF, 3090 Tower and XE3 systems. It delivers a straightforward capacity increase for office workstations that need more headroom for multitasking and larger datasets. The unbuffered non-ECC design matches the standard desktop memory architecture used in these models.

Check your OptiPlex model and slot layout

Verify the exact OptiPlex variant — 3080 SFF, 3080 Tower, 3090 SFF, 3090 Tower or XE3 — before ordering because memory-slot count and maximum supported capacity differ between chassis. Confirm the motherboard has a free 288-pin DDR4 UDIMM slot and that the BIOS is current enough to recognise a 32GB 2Rx8 module at 2666MHz. Systems limited to lower densities or speeds will not accept this upgrade.

JEDEC compliance and backward speed support

The module meets JEDEC standard specifications and is ROHS compliant, ensuring a warranty-safe upgrade that follows the original equipment manufacturer profile. It will automatically clock down to 2133MHz or 2400MHz if the platform requires those speeds, so installation remains simple without manual configuration. No heat spreader is included, keeping the profile low for tight small-form-factor chassis.

Najważniejsze cechy

  • 32 GB capacity handles large files and multitasking
  • 2666 MHz DDR4 speed matches OptiPlex 3080 and 3090 specs
  • CL19 latency and 1.2 V voltage meet JEDEC standard
  • 288-pin unbuffered non-ECC UDIMM fits desktop DIMM slots
  • Backward compatible with 2133 MHz and 2400 MHz systems

Specyfikacja

BrandOWC
Part Number2U6D42R832GB
Capacity32GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3080 SFF
Dell OptiPlex 3080 Tower
Dell OptiPlex 3090 SFF
Dell OptiPlex 3090 Tower
Dell OptiPlex XE3

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does the 32GB DDR4 2666MHz UDIMM arrive as a single stick or a kit, and is any tool or bracket required for installation?

The module is a single 32GB 288-pin UDIMM. No tools or brackets are needed; it installs directly into a standard DDR4 DIMM slot on the compatible Dell OptiPlex systems.

Should I choose the 32GB CL19 module or a lower-capacity alternative for a Dell OptiPlex 3080 SFF?

The 32GB 2Rx8 module maximises the memory capacity per slot on the OptiPlex 3080 SFF. Select a smaller capacity only if your budget requires it or if the board limits total memory below 32GB.

Will the PC4-21300 rating run at 2666MHz on a Dell OptiPlex 3090 Tower, or does it down-clock?

The module is rated for 2666MHz CL19 at 1.2V and is backward compatible with 2133MHz and 2400MHz. On a 3090 Tower it will operate at the highest speed the platform supports, up to 2666MHz.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.