Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

OWC

OWC 8GB (2x4GB) DDR3 1066MHz CL7 SODIMM Kit OWC8566DDR3S8GP

SKU CH-Z1PC-3P7SZ MPN OWC8566DDR3S8GP

An 8 GB DDR3 1066 MHz CL7 SODIMM kit for 2008-2010 MacBook, MacBook Pro and Mac mini models

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • 8GB (2 x 4GB)
  • 16GB (2 x 8GB)
  • 32GB (4 x 8GB)

Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.

  • 8GB kit doubles notebook capacity with two 4GB modules
  • DDR3 1066MHz CL7 timing keeps older Macs responsive
  • Unbuffered non-ECC design matches factory specifications exactly
  • 204-pin SO-DIMM form factor fits MacBook Pro 2008-2010 and Mac mini 2009+
  • Low 1.5V operation reduces heat in compact aluminium chassis

Targeted Mac Memory Upgrade

This 8 GB kit supplies two 4 GB DDR3 SO-DIMMs rated at 1066 MHz with CL7 latency. It is built for MacBook Pro models from 2008 through 2010, MacBook 13-inch unibody units, and Mac mini systems from 2009 onward. The modules are unbuffered and non-ECC, matching the original specification for these notebooks and small-form-factor desktops.

Standard SO-DIMM Build Quality

Each stick uses a 204-pin edge connector and operates at 1.5 V, fitting directly into the factory memory slots without adapters. The 340 mil board thickness and 4.8 by 6.8 inch dimensions follow the JEDEC SO-DIMM outline, so the modules seat securely in the tight compartments of the listed MacBooks and Mac mini. Gold-plated contacts resist oxidation over long service life.

Replaces Lower-Capacity Factory Modules

The kit upgrades machines that shipped with 2 GB or 4 GB of memory, doubling or quadrupling the available RAM for smoother multitasking and larger project files. The jump is most worthwhile when the system currently runs a single module or a mismatched pair, because matched 4 GB sticks enable dual-channel bandwidth. Systems already populated with 8 GB of matched DDR3 1066 will not see a capacity gain from this kit.

Najważniejsze cechy

  • 8GB kit doubles notebook capacity with two 4GB modules
  • DDR3 1066MHz CL7 timing keeps older Macs responsive
  • Unbuffered non-ECC design matches factory specifications exactly
  • 204-pin SO-DIMM form factor fits MacBook Pro 2008-2010 and Mac mini 2009+
  • Low 1.5V operation reduces heat in compact aluminium chassis

Specyfikacja

Capacity8GB (2 x 4GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
ECCNo
Buffered/RegisteredUnbuffered
Waga przesyłki0.02 kg
Wymiary opakowania3 × 3 × 3 mm

Pytania dotyczące tego produktu

What DDR3 standard and speed does this 204-pin SO-DIMM kit run at?

The kit operates at the DDR3-1066 standard, also labelled PC3-8500, with a CAS latency of CL7 and 1.5 V.

Which Mac models have the 204-pin slot this kit requires?

Compatible models include MacBook Pro 13-inch, 15-inch and 17-inch from 2008 to 2010, MacBook 13-inch Unibody 2009 to 2010, and Mac mini 2009 and later.

How are the two 4 GB modules installed, and what step is often missed?

Insert each module at an angle into the SO-DIMM slot until the gold contacts disappear, then press down firmly until both side clips click into the notches.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.