Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Grey ATX power supply with 80mm fan and fixed cables

Replace Power

Replace Power HP A1129n A1130e A1130n A1132n A1150Y CTO 280 W 420 W ATX power supply

SKU CH-JNX9-D1YCD

Reduced-depth ATX unit delivers 280 W continuous with 420 W peak, fits HP desktops using 20+4-pin, 4-pin CPU, three SATA and two Molex connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Fits compact cases with reduced 5.86" depth design
  • Powers HP A1129n A1130e A1130n A1132n A1150Y CTO systems reliably
  • Delivers 280 W continuous and 420 W peak output
  • Supplies SATA Molex floppy and 20+4 pin ATX connectors
  • Runs on 110/220 V 47-63 Hz worldwide AC input

Replacement PSU for HP Desktops

This unit replaces the factory power supply in HP A1129n A1130e A1130n A1132n and A1150Y CTO systems. It uses a standard ATX form factor with reduced depth so it fits the original chassis without modification. A single 80 mm fan provides cooling for stable long-term operation. The grey housing matches the OEM aesthetic.

Upgrade from Failed OEM Units

The jump is worth it when the original supply has failed or shows voltage instability under load. Continuous output is rated at 280 W with a 420 W peak capability. Low ripple and noise specification protects sensitive components. Hi-Pot testing and ROHS CE compliance confirm basic safety standards.

Capacity and Headroom

The 280 W continuous rating comfortably runs typical office configurations with integrated graphics and a few drives. Peak headroom of 420 W handles brief startup surges. Builders who need more storage than three SATA 15-pin connectors or multiple high-power GPUs should look elsewhere.

Najważniejsze cechy

  • Fits compact cases with reduced 5.86" depth design
  • Powers HP A1129n A1130e A1130n A1132n A1150Y CTO systems reliably
  • Delivers 280 W continuous and 420 W peak output
  • Supplies SATA Molex floppy and 20+4 pin ATX connectors
  • Runs on 110/220 V 47-63 Hz worldwide AC input

Specyfikacja

BrandReplace Power
ModelHP A1129n A1130e CTO A1130n A1132n A1150Y CTO
ColorGrey
TypeATX
Fans1
Weight4

Pytania dotyczące tego produktu

Will the 5.86-inch depth fit my HP A1129n case?

The unit measures 5.86 inches deep, shorter than a standard ATX supply, so it clears tight chassis space in the listed HP models.

Which cable should I connect to the 4-pin CPU header on the motherboard?

Use the dedicated P4 4-pin connector; the 24-pin plug splits as 20+4 for the main board power, but the separate 4-pin is for the processor.

How often should I clean the 80mm cooling fan?

Blow dust out of the fan intake every six to twelve months to keep airflow steady and noise low.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.