Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Replace Power

Replace Power RPSU-C95-13 400 W ATX power supply

SKU CH-BGSD-YV556 MPN RPSU-C95-13

Grey ATX 400 W unit with 20+4 pin, 4-pin CPU, three SATA 15-pin, two Molex and one floppy connector fits LandC LC-8400BTX and Liteon PS-6251-2H1

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Delivers 400 W for stable system operation
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors power multiple drives
  • Over-voltage protection guards components from spikes
  • Compact 5.8 x 3.37 form factor suits tight cases

Direct replacement for LandC and Liteon units

This 400 W ATX power supply is built as a drop-in replacement for the LandC LC-8400BTX and Liteon PS-6251-2H1 models. It suits system builders and repair technicians who need a compatible unit for legacy desktops without modifying the chassis or wiring.

Grey steel enclosure with single fan and mixed

The grey metal housing measures 5.8 by 3.37 inches and uses one internal fan for airflow. Output connectors include a 24-pin ATX (20+4) motherboard plug, a 4-pin P4 12 V CPU lead, three SATA power plugs, two Molex 4-pin leads and one floppy 4-pin lead, covering both modern and older drive types.

Check your case mounting points

Verify that the 5.8 by 3.37 inch footprint matches the original PSU bracket in your chassis. Confirm that 400 W meets the combined load of your CPU, graphics card, drives and add-in cards, and ensure the 20+4 pin and 4-pin CPU connectors reach their sockets without strain.

Najważniejsze cechy

  • Delivers 400 W for stable system operation
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors power multiple drives
  • Over-voltage protection guards components from spikes
  • Compact 5.8 x 3.37 form factor suits tight cases

Specyfikacja

BrandReplace Power
ModelRPSU-C95-13
ColorGrey
TypeATX
Fans1
Weight0.1

Pytania dotyczące tego produktu

Does the 20+4 pin ATX connector on the RPSU-C95-13 support both 20-pin and 24-pin motherboards?

Yes, the 20+4 pin ATX connector fits both 20-pin and 24-pin motherboard sockets, so it works with older and newer boards alike.

Will the 5.8 by 3.37 inch dimensions of the RPSU-C95-13 fit inside a standard ATX case?

The unit measures 5.8 by 3.37 inches, matching the standard ATX footprint, so it mounts in any regular ATX chassis using the usual four screws.

How do I install the RPSU-C95-13 and what is the step most people miss?

Mount the PSU with four screws, plug the 20+4 pin ATX, 4-pin P4, three SATA, two Molex and one floppy connector, then switch the rear voltage selector to match your mains — that selector is the step most people forget.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.