Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Sabrent

Sabrent DS-U3B4 4-Bay USB 3.0 SATA 2.5/3.5 drive enclosure

SKU CH-SFMY-SBTBX MPN DS-U3B4

Four-bay docking station accepts 2.5 and 3.5 SATA drives with tool-free hot-swap and up to 5Gbps USB 3.0 transfer

  • ColorBlack
  • Size2.5" & 3.5"
  • TypeDock
  • MaterialPlastic
  • Internal InterfaceSATA III
  • External InterfaceUSB 3.0

External Interface USB 3.0

  • USB 3.0
  • USB 3.2

Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.

Number of Bay 4 Bay

  • 1 Bay
  • 4 Bay
  • 5 Bay

Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.

  • Tool-free installation lets you add drives in seconds
  • Transfer speeds up to 5Gbps via USB 3.0
  • Four bays accept 2.5 or 3.5 inch SATA drives simultaneously
  • Hot-swappable design allows drive changes without powering down
  • LED indicators show power and activity status for each bay

Four-bay SATA docking station

The Sabrent DS-U3B4 is a four-bay USB 3.0 docking station that accepts 2.5-inch or 3.5-inch SATA hard drives and SSDs. It connects to a host computer over a single USB 3.0 cable and provides tool-free, hot-swappable access to all installed drives simultaneously.

Suits multi-drive workflows.

This dock suits technicians, archivists and enthusiasts who need to read, clone or wipe several SATA drives at once without fitting them inside a case. Buyers who want hardware RAID management, a single-drive portable enclosure or bus-powered operation should look elsewhere.

One-button drive cloning

A dedicated clone button on the unit duplicates data from one source drive to a target drive without involving the host PC. The feature works only with SATA drives and requires both bays to be populated.

Najważniejsze cechy

  • Tool-free installation lets you add drives in seconds
  • Transfer speeds up to 5Gbps via USB 3.0
  • Four bays accept 2.5 or 3.5 inch SATA drives simultaneously
  • Hot-swappable design allows drive changes without powering down
  • LED indicators show power and activity status for each bay

Specyfikacja

BrandSABRENT
ColorBlack
Size2.5" & 3.5"
TypeDock
MaterialPlastic
Internal InterfaceSATA III
External InterfaceUSB 3.0
Number of Bay4 Bay
Waga przesyłki1.08 kg
Wymiary opakowania199 × 147 × 78 mm

Pytania dotyczące tego produktu

How do I install a 3.5" SATA drive into the Sabrent DS-U3B4, and what step is commonly missed?

Slide the 3.5" drive straight down into a bay until the SATA connector seats firmly; the step often missed is not pushing far enough so the drive appears connected but reads errors.

What maintenance or part replacement will the Sabrent DS-U3B4 need over time?

The USB 3.0 cable and the power adapter are the only wear items; keep the bay slots free of dust and reseat drives if LED indicators flicker.

What limit appears first when all four bays run sustained transfers on the Sabrent DS-U3B4?

The shared USB 3.0 5Gbps upstream link saturates before any single SATA drive, so combined throughput drops when multiple drives are active.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.