SAMSUNG
SAMSUNG MZ1L2960HCJR-00A07 960GB enterprise SSD
M.2 960GB NVMe drive delivering 6800 MB/s reads and 4000 MB/s writes for enterprise workloads
- Form FactorM.2
- Capacity960GB
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp To 6800mbps
- Max Sequential WriteUp To 4000mbps
- 4KB Random ReadUp to 1,000,000 IOPS
Capacity 960GB
- 1.9TB
- 3.8TB
- 960GB
Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.
- Fast boot and load times with up to 6800 MB/s sequential read
- Responsive heavy workloads via up to 4000 MB/s sequential write
- Smooth random access at up to 1,000,000 IOPS read
- Consistent write performance up to 180,000 IOPS
- Compact M.2 form factor fits dense server builds
Samsung PM9A3 960GB Enterprise NVMe SSD
The Samsung PM9A3 is a 960GB enterprise-class solid-state drive in the M.2 form factor. It connects via a PCI-Express 4.0 x4 interface and delivers sequential reads up to 6800mbps and writes up to 4000mbps. Random read performance reaches 1,000,000 IOPS while random writes hit 180,000 IOPS. This new drive targets servers and workstations that need high-throughput, low-latency storage.
Suited for PCIe 4.0 platforms needing 960GB capacity
This drive fits systems with an M.2 slot wired for PCI-Express 4.0 x4 and workloads that benefit from its read-heavy performance profile. It is not appropriate for platforms limited to PCIe 3.0 or lower, nor for buyers who require larger capacities or higher random write endurance than 180,000 IOPS.
PCI-Express 4.0 x4 interface decides compatibility
The single specification that determines fit is the PCI-Express 4.0 x4 interface; the host must provide an M.2 slot electrically wired for four lanes of PCIe 4.0 to achieve the rated 6800mbps read and 4000mbps write speeds. Without that link width and generation the drive will fall back to lower performance.
Najważniejsze cechy
- Fast boot and load times with up to 6800 MB/s sequential read
- Responsive heavy workloads via up to 4000 MB/s sequential write
- Smooth random access at up to 1,000,000 IOPS read
- Consistent write performance up to 180,000 IOPS
- Compact M.2 form factor fits dense server builds
Specyfikacja
| Brand | SAMSUNG |
|---|---|
| Series | PM9A3 |
| Part Number | MZ1L2960HCJR-00A07 |
| Form Factor | M.2 |
| Capacity | 960GB |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up To 6800mbps |
| Max Sequential Write | Up To 4000mbps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 180,000 IOPS |
| Waga przesyłki | 0.18 kg |
| Wymiary opakowania | 152 × 51 × 18 mm |
Pytania dotyczące tego produktu
Does my motherboard need an M.2 slot with PCIe 4.0 x4 lanes for this PM9A3 drive to work?
The drive uses an M.2 form factor and a PCI-Express 4.0 x4 interface, so the board must provide an M.2 slot wired for PCIe 4.0 x4.
Will this NVMe SSD run in a PCIe 3.0 M.2 slot if I keep my current server board?
It is backward compatible with PCIe 3.0 slots, though sequential speeds will be limited to the 3.0 x4 ceiling.
How can I verify the drive is delivering its rated 6800 MB/s read and 4000 MB/s write after installation?
Run a sequential benchmark such as CrystalDiskMark or fio; sustained reads near 6800 MB/s and writes near 4000 MB/s confirm expected operation.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
