Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Sapphire Nitro+ Radeon RX 9070 XT triple-fan graphics card in silver and black

Sapphire Tech

Sapphire Tech NITRO+ Radeon RX 9070 XT 16GB GDDR6 OC graphics card

SKU CH-3PYH-3S453

A 16 GB GDDR6 graphics card with a 256-bit bus, 4096 stream processors and a boost clock up to 3060 MHz, plus HDMI and DisplayPort 2.1 outputs on a PCI Express 5.0 x16 interface

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 9000 Series
  • GPURadeon RX 9070 XT
  • ArchitectureRDNA 4
  • Game ClockUp to 2520 MHz
  • 16 GB GDDR6 memory feeds 4K textures at 20 Gbps
  • Boost clock reaches 3060 MHz for high frame rates
  • 4096 stream processors handle heavy compute workloads
  • PCI Express 5.0 x16 doubles host bandwidth
  • Two HDMI and two DisplayPort 2.1a drive four monitors

Nitro+ Radeon RX 9070 XT 16GB for 4K gaming

The Sapphire Tech NITRO+ Radeon RX 9070 XT 16GB GDDR6 OC graphics card targets enthusiasts who want high-frame-rate 4K gaming. It uses the RDNA 4 architecture with 4096 stream processors and a 256-bit memory interface. The 16GB GDDR6 frame buffer runs at 20000 MHz effective, feeding the GPU at up to 3060 MHz boost. PCI Express 5.0 x16 provides full bandwidth to modern platforms.

Thermals and power profile

A triple-fan cooler with vapour chamber contact keeps the GPU near its 2520 MHz game clock under sustained load. Fan curves stay quiet at idle and ramp gradually, so noise remains low during typical sessions. The board draws power through three 8-pin connectors, reflecting the 3060 MHz boost ceiling. A quality power supply with enough 12V current is required for stable operation.

Build quality and connectivity

The metal backplate reinforces the PCB and helps dissipate memory heat. Dual BIOS switches between performance and quiet profiles without software. Two HDMI and two DisplayPort 2.1a outputs drive up to four displays simultaneously. The ATX form factor fits standard cases, and the reinforced bracket prevents sag over time.

Najważniejsze cechy

  • 16 GB GDDR6 memory feeds 4K textures at 20 Gbps
  • Boost clock reaches 3060 MHz for high frame rates
  • 4096 stream processors handle heavy compute workloads
  • PCI Express 5.0 x16 doubles host bandwidth
  • Two HDMI and two DisplayPort 2.1a drive four monitors

Specyfikacja

BrandSAPPHIRE
SeriesNITRO+
ModelNITRO+ 9070 XT 16G D6 OC
Part NumberNITRO+ 9070 XT 16G D6 OC
InterfacePCI Express 5.0 x16
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 9000 Series
GPURadeon RX 9070 XT
ArchitectureRDNA 4
Game ClockUp to 2520 MHz
Boost ClockUp to 3060 MHz
Stream Processors4096
Effective Memory Clock20000 MHz (20 Gbps)
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI
DisplayPort2 x DisplayPort 2.1a
ColorGray
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power304W
Recommended PSU Wattage850W
Power Connector1 x 12V-2x6-pin
HDCP ReadyYes
Form FactorATX
Max GPU Length331 mm
Card Dimensions (L x H)331 x 129 x 66 mm
Slot Width3.2 Slots

Pytania dotyczące tego produktu

How do I install this PCI Express 5.0 x16 card and which step is often missed?

Seat the card firmly in the top PCIe 5.0 x16 slot until the retention latch clicks, then connect both 8-pin power cables from the PSU; the step most builders skip is plugging in the second power connector, which prevents the 3060 MHz boost clock from being reached.

What maintenance will the NITRO+ 9070 XT 16G D6 OC need later?

Every six to twelve months use compressed air to clear dust from the heatsink fins and the three axial fans so the 4096 stream processors stay at their game clock of 2520 MHz under load; no liquid-metal or pad replacement is required.

What limit appears first during sustained gaming on this 16GB GDDR6 model?

The 256-bit memory interface running at 20000 MHz effective saturates before the GPU core, so memory bandwidth becomes the bottleneck in extended 4K sessions.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.