Seagate
Seagate IronWolf Pro 8 TB 3.5-inch 7200 RPM 256 MB SATA internal hard drive
An 8 TB 3.5-inch 7200 RPM SATA drive with 256 MB cache, CMR technology and 550 TB/year workload rating for 24×7 NAS RAID arrays
- PackagingFFP
- Interfaceserial_ata
- Capacity8 TB
- Flash Memory Capacity8 TB
- RPM7200 rpm
- Cache256 unknown_modifier
- Consistent 24×7 access enabled by all-CMR recording technology
- High endurance with 550 TB annual workload rating and 2.5M hours MTBF
- Complimentary 3-year Rescue Data Recovery Services included
- IronWolf Health Management monitors prevention, intervention and recovery
- AgileArray optimisation with dual-plane balancing, TLER and RV sensors for RAID
Purpose-built NAS storage
The Seagate IronWolf Pro 8 TB is a 3.5-inch internal hard drive designed for multi-bay NAS enclosures. Its conventional magnetic recording technology and 7200 rpm spindle speed deliver consistent performance for 24×7 operation in RAID arrays.
Capacity and workload limits
The drive provides 8 TB of storage with a 256 MB cache and sustained transfer rates of 200 to 250 MB/s. It is rated for up to 550 TB per year workload and 2.5 million hours MTBF, making it suitable for heavy multi-user access and backup tasks.
Build integration
The unit connects via a SATA 6 Gb/s port and requires a standard 3.5-inch drive bay. AgileArray firmware with dual-plane balancing and rotational vibration sensors helps maintain stability in densely populated chassis, while the included three-year Rescue Data Recovery plan adds a safety net for critical data.
Najważniejsze cechy
- Consistent 24×7 access enabled by all-CMR recording technology
- High endurance with 550 TB annual workload rating and 2.5M hours MTBF
- Complimentary 3-year Rescue Data Recovery Services included
- IronWolf Health Management monitors prevention, intervention and recovery
- AgileArray optimisation with dual-plane balancing, TLER and RV sensors for RAID
Specyfikacja
| Brand | Seagate |
|---|---|
| Model | ST8000NTZ01 |
| Part Number | 763649176993 |
| Packaging | FFP |
| Interface | serial_ata |
| Capacity | 8 TB |
| Flash Memory Capacity | 8 TB |
| RPM | 7200 rpm |
| Cache | 256 unknown_modifier |
| Features | Portable |
| Form Factor | 3.5-inch |
| Height (maximum) | 146.99 in x 101.85 in x 26.11 in |
| Width (maximum) | 146.99 in x 101.85 in x 26.11 in |
| Length (maximum) | 146.99 in x 101.85 in x 26.11 in |
Pytania dotyczące tego produktu
Will the 3.5-inch SATA drive work with my older motherboard that only has SATA 3 Gb/s ports?
Yes, the drive connects via SATA and will run at the slower SATA 3 Gb/s speed of the older port, so it remains compatible with existing hardware.
How can I verify the 7200 RPM drive is healthy after installing it in my NAS?
Use the IronWolf Health Management software to run a SMART test and check the workload rating against the 550 TB per year figure; a clean result confirms the drive is operating as intended.
Does the box include a SATA data cable or mounting screws for the 3.5-inch drive?
The package contains only the IronWolf Pro drive itself; a SATA data cable and 3.5-inch mounting screws must be purchased separately if your system does not already have them.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
