Seagate
Seagate ST2000NM0033 2TB 7200 RPM 128MB 3.5" SATA internal hard drive
A 2 TB desktop hard drive spinning at 7200 RPM with a 128 MB cache and a SATA interface
- 2 TB capacity stores large media libraries
- 7200 RPM spindle speed delivers quick data access
- 128 MB cache buffers bursts for smooth throughput
- SATA 6 Gb/s interface fits standard desktop bays
- 5 inch form factor suits tower and rack builds
Enterprise 2TB capacity
This 2 TB desktop internal hard drive is built for workloads that demand sustained throughput and high areal density. The 7200 RPM spindle speed and 128 MB cache suit servers, NAS arrays and workstations that write large sequential datasets day after day.
3.5-inch SATA integration
The drive fits a standard 3.5 in drive bay and connects through a 6 Gb/s SATA interface, requiring only a SATA data cable and a SATA power connector from the host system. No additional controller or mounting adapter is needed for typical chassis or hot-swap trays.
2TB headroom and limits
Two terabytes provide ample room for bulk media archives, backup repositories and virtual-machine images while keeping cost per gigabyte low. The mechanical design reaches its practical ceiling with random, latency-sensitive workloads or when total capacity must scale beyond a single drive.
Najważniejsze cechy
- 2 TB capacity stores large media libraries
- 7200 RPM spindle speed delivers quick data access
- 128 MB cache buffers bursts for smooth throughput
- SATA 6 Gb/s interface fits standard desktop bays
- 5 inch form factor suits tower and rack builds
Specyfikacja
Na razie brak opublikowanej specyfikacji tego produktu.
Pytania dotyczące tego produktu
What is the maximum sustained transfer rate the 7200 RPM platters can deliver?
The 7200 RPM rotation speed and 128 MB cache support the SATA 6 Gb/s interface for sustained sequential throughput.
How much heat and noise does the 3.5 inch drive produce during continuous operation?
The 3.5 in form factor and 7200 RPM spindle generate typical enterprise-class acoustics and thermal output for always-on workloads.
Which host connector and power cable must my system provide for this SATA drive?
A standard SATA data port and a 15-pin SATA power connector are required to install the 3.5 in drive.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
