BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277675BTC
Dostępny
SK hynix
SK hynix HMT451U6AFR8C-PB 8GB (2x4GB) DDR3-1600 CL11 desktop RAM
An 8 GB dual-channel DDR3 kit running at 1600 MHz with CL11 latency on 240-pin DIMMs
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- ECCNo
- Buffered/RegisteredUnbuffered
- Heat SpreaderNo
- 8 GB total capacity for multitasking with two 4 GB modules
- DDR3-1600 speed delivers 12800 MT/s data rate
- CL11 latency keeps response tight
- 240-pin UDIMM fits standard desktop slots
- Unbuffered non-ECC design suits consumer boards
Kit contents
This kit contains two unbuffered DIMMs for a total of 8 GB. Each module provides 4 GB at DDR3-1600 with a CAS latency of 11. The 240-pin form factor fits standard desktop slots.
No extras
No heat spreaders, software utilities or additional accessories are included in the package. The modules operate at the rated PC3-12800 speed without requiring extra configuration tools.
Plain build
The bare green PCB keeps the profile low for tight spaces between large CPU coolers. Standard 240-pin connectors ensure straightforward installation in any compatible desktop motherboard.
Najważniejsze cechy
- 8 GB total capacity for multitasking with two 4 GB modules
- DDR3-1600 speed delivers 12800 MT/s data rate
- CL11 latency keeps response tight
- 240-pin UDIMM fits standard desktop slots
- Unbuffered non-ECC design suits consumer boards
Specyfikacja
| Brand | SK Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMT451U6BFR8C-PB |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
Pytania dotyczące tego produktu
Will these two 4 GB modules run in dual-channel on my board?
Yes, the kit contains a matched pair of 4 GB DIMMs designed to operate together in dual-channel mode.
Does this memory require a heat spreader or active cooling?
No, the modules ship without a heat spreader and run at standard DDR3 voltage; typical case airflow is sufficient.
My motherboard has four DDR3 slots — can I add this kit alongside my existing 4 GB stick?
You can, but mixing capacities or speeds may force the system to run in single-channel or at the lowest common speed.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280258BTC
Dostępny
