Solidigm
Solidigm D7-P5520 SSDPFWKX153T1N1 15.36TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD
15.36TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD with 144L TLC 3D NAND, 7100 MBps read, 3700 MBps write, 1000000 IOPS random read and 28.0 PBW endurance
- Form FactorE1.L 9.5mm
- Capacity15.36TB
- Memory Components144L TLC 3D NAND
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 7100 MBps
- Max Sequential WriteUp to 3700 MBps
- 36TB capacity supports massive datasets
- 7100 MBps sequential read accelerates data access
- 1,000,000 IOPS random read handles heavy workloads
- 0 PBW endurance ensures long service life
- E1.L 9.5mm form factor fits dense server chassis
Enterprise capacity for dense servers
The Solidigm D7-P5520 delivers 15.36TB in an E1.L 9.5mm module built for PCIe 4.0 x4 backplanes. It targets data-centre operators who need high-capacity flash in a slim, hot-pluggable form factor. The 144L TLC 3D NAND supports mixed read and write workloads typical of cloud storage and database tiers.
Thermals and power in rack use
Active power draw is rated at 20W with an idle state of 5W, so the drive fits standard E1.L thermal budgets without exotic cooling. Operating temperature spans 0°C to 70°C, matching typical inlet conditions in contained aisles. Vibration tolerance reaches 2.17 GRMS operating and 3.13 GRMS non-operating across the specified frequency bands.
Build quality and daily mounting
The 215g unit meets a 1,000 G shock rating at 0.5 msec, helping it survive insertion and transit events. A 2,000,000-hour MTBF and 28.0 PBW endurance rating reflect the write-heavy design point. The E1.L 9.5mm connector enables tool-less, single-slot installation in compatible cages, simplifying capacity expansion.
Najważniejsze cechy
- 36TB capacity supports massive datasets
- 7100 MBps sequential read accelerates data access
- 1,000,000 IOPS random read handles heavy workloads
- 0 PBW endurance ensures long service life
- E1.L 9.5mm form factor fits dense server chassis
Specyfikacja
| Brand | Solidigm |
|---|---|
| Model | D7-P5520 |
| Part Number | SSDPFWKX153T1N1 |
| Form Factor | E1.L 9.5mm |
| Capacity | 15.36TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7100 MBps |
| Max Sequential Write | Up to 3700 MBps |
| 4KB Random Read | 1000000 IOPS (4K Blocks) |
| 4KB Random Write | 200000 IOPS (4K Blocks) |
| Endurance | 28.0 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 20W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating 2.17 GRMS (5 - 700 Hz) Max Non-Operating 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 215g +/- 5g |
| Waga przesyłki | 0.17 kg |
| Wymiary opakowania | 140 × 110 × 17 mm |
Pytania dotyczące tego produktu
How do I install the E1.L 9.5mm drive in a PCIe 4.0 x4 server slot, and what step is often missed?
Slide the drive into the hot-plug E1.L bay until the connector seats fully, then secure the retention latch; the step often missed is confirming the latch clicks, otherwise the PCIe 4.0 x4 link will not train.
What maintenance or replacement will the 144L TLC 3D NAND need after heavy use?
The drive has a 28.0 PBW endurance rating; once that write budget is reached the NAND must be replaced, and no field maintenance is required before then.
What limit appears first under sustained write workloads on this 15.36TB drive?
The sequential write ceiling of 3700 MBps is reached before the 20W active power limit or the 70°C thermal ceiling under sustained loads.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
