Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 90mm sleeve-bearing fan on compact aluminium heatsink

Spire

Spire SP520S0 CPU cooler 90mm sleeve 2400 RPM 45.18 CFM 26.0 dBA

SKU CH-SGYC-F2FGX MPN SP520S0

A 90 mm sleeve-bearing fan spins at 2400 RPM to push 45.18 CFM through an aluminum heatsink at 26.0 dBA for LGA 775 CPUs

  • ColorBlack
  • TypeFan & Heatsinks
  • Fan Size90mm
  • Bearing TypeSleeve
  • RPM2400 ±10% RPM
  • Air Flow45.18 CFM
  • Quiet cooling at 26.0 dBA with sleeve bearing fan
  • Strong airflow of 45.18 CFM from 2400 RPM fan
  • Compact 90mm fan fits tight chassis spaces
  • Aluminium heatsink with large base improves heat transfer
  • Supports Intel LGA 775 processors for legacy builds

Intel LGA 775 Cooler

The Spire SP520S0 is a new CPU air cooler built around a 90mm sleeve-bearing fan and an extruded aluminium heatsink. It mounts directly onto Intel LGA 775 sockets and delivers 45.18 CFM at 2400 RPM while producing 26.0 dBA of noise. The compact heatsink measures 72 by 72 by 30mm and the fan frame is 90 by 90 by 25mm.

Legacy Platform Maintainers

This cooler suits technicians servicing LGA 775 systems or builders assembling period-correct retro rigs where a low-profile aluminium tower is required. It is not for modern socket platforms, nor for high-TDP processors that demand greater thermal mass or heat-pipe designs.

90mm Sleeve Bearing Fan

The 90mm sleeve-bearing fan spins at 2400 RPM to move 45.18 CFM through the aluminium fins at a rated 26.0 dBA. This single airflow figure determines whether the cooler can handle the thermal load of the target processor.

Najważniejsze cechy

  • Quiet cooling at 26.0 dBA with sleeve bearing fan
  • Strong airflow of 45.18 CFM from 2400 RPM fan
  • Compact 90mm fan fits tight chassis spaces
  • Aluminium heatsink with large base improves heat transfer
  • Supports Intel LGA 775 processors for legacy builds

Specyfikacja

BrandSpire
ModelSP520S0
ColorBlack
TypeFan & Heatsinks
Fan Size90mm
Bearing TypeSleeve
RPM2400 ±10% RPM
Air Flow45.18 CFM
Noise Level26.0 dBA
Heatsink MaterialAluminum
Fan Dimensions90 × 90 × 25mm
Heatsink Dimensions72 × 72 × 30mm
FeaturesSupports all new Intel LGA 775 micro-processors
90x90x25mm Sleeve bearing fan for silent operation
Extruded heat-sink with large base for optimal heat conductivity
Waga przesyłki0.36 kg
Wymiary opakowania121 × 114 × 102 mm

Pytania dotyczące tego produktu

Will the SP520S0 fit my LGA 775 motherboard mounting holes?

The cooler is designed to support all new Intel LGA 775 micro-processors, so its mounting hardware aligns with the standard LGA 775 socket pattern.

Can I run the 90 mm sleeve-bearing fan at a lower speed on a 3-pin header to reduce the 26.0 dBA noise level?

Yes, reducing voltage on a 3-pin header will lower the fan speed below the rated 2400 ±10% RPM, which reduces both airflow from 45.18 CFM and the 26.0 dBA acoustic output.

How do I verify the fan is spinning at the specified 2400 RPM after installation?

Check the CPU fan speed reading in your BIOS hardware monitor or a Windows utility; it should report a value within the 2400 ±10% RPM range when the system is under load.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.