Transcend
Transcend PCIe SSD 115S 250GB NVMe M.2 2280 internal hard drive
NVMe 1.4 PCIe Gen3 x4 drive with 250 GB capacity, up to 3,200 MB/s read and 2,000 MB/s write in M.2 2280 form factor
- NVMe 1.4 PCIe Gen3 x4 interface for fast data paths
- Read speeds up to 3,200 MB/s and write speeds up to 1,300 MB/s
- M.2 2280 80 mm form factor fits desktops and laptops
- 250 GB capacity provides solid-state storage space
- LDPC error correction and dynamic thermal throttling protect data integrity
PCIe Gen3 x4 NVMe 115S SSD
This Transcend PCIe SSD 115S is a 250GB NVMe drive built for desktops, laptops and ultrabooks with an M.2 2280 slot. It connects through a PCIe Gen3 x4 interface and follows the NVMe 1.4 specification. The drive measures 80mm long and is sold new.
Everyday workloads and mobile upgrades
The sequential reads reach 3200MB/s and writes reach 2000MB/s, which suits operating-system drives, application storage and general file handling in mainstream systems. Builders needing higher endurance for sustained heavy writes or larger capacities for media libraries should consider other options.
NVMe 1.4 PCIe Gen3 x4 interface
The drive uses the NVMe 1.4 protocol over four PCIe Gen3 lanes, so the host must provide an M.2 slot wired for PCIe NVMe. Systems with M.2 slots that only support other protocols will not work with this SSD.
Najważniejsze cechy
- NVMe 1.4 PCIe Gen3 x4 interface for fast data paths
- Read speeds up to 3,200 MB/s and write speeds up to 1,300 MB/s
- M.2 2280 80 mm form factor fits desktops and laptops
- 250 GB capacity provides solid-state storage space
- LDPC error correction and dynamic thermal throttling protect data integrity
Specyfikacja
Na razie brak opublikowanej specyfikacji tego produktu.
Pytania dotyczące tego produktu
Does the PCIe Gen3 x4 interface on the 115S run hot or draw much power when it is reading at 3200MB/s all day?
The 115S uses a low-power M.2 2280 design and includes dynamic thermal throttling to keep temperatures and power draw in check during sustained high-speed transfers.
My desktop motherboard only has an M.2 slot — is that the only thing I need to install this 250GB NVMe 1.4 drive?
Yes, an M.2 2280 slot wired for PCIe Gen3 x4 is sufficient; no extra cables, brackets or power connectors are required.
Will the 115S work reliably in an older laptop that only supports PCIe Gen2 x4?
The drive is backward compatible with PCIe Gen2 slots, so it will function at the slower link speed while still providing NVMe 1.4 features such as LDPC error correction.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
