Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small black 30mm square case fan with two wires

Zyvpee

Zyvpee AD0312LX-K70 30mm 12V 0.06A case fan

SKU CH-GDTW-6SWDV

A 30 mm ball-bearing case fan running up to 1600 RPM on a two-wire 12 V connection

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Wires
  • Compact 30 mm frame fits tight CPU coolers
  • Ball bearing rated for continuous 12 V operation
  • Low 0.06 A draw keeps power use minimal
  • Two-wire connector installs without adapters
  • Under 1600 RPM for quieter 3 cm cooling

Zyvpee AD0312LX-K70 30mm case fan

The Zyvpee AD0312LX-K70 is a 30mm case fan designed for compact CPU coolers and graphics card cooling. It operates at 12V with a 0.06A current draw and uses a two-wire power connector. The ball bearing supports speeds up to 1600 RPM in a black non-LED housing.

Check voltage and connector before ordering

Verify that your cooler or graphics card provides a 12V two-wire header for this fan. The physical dimensions are 30 by 10 millimetres so the mounting holes must match that spacing. Ensure the existing fan cable reaches the header without strain.

Ball bearing sustains steady airflow under load

The ball bearing design maintains consistent rotation during extended operation rather than only in short bursts. Rated speed stays below 1600 RPM while the two-wire supply delivers stable 12V power. This construction suits continuous cooling duty in tight spaces.

Najważniejsze cechy

  • Compact 30 mm frame fits tight CPU coolers
  • Ball bearing rated for continuous 12 V operation
  • Low 0.06 A draw keeps power use minimal
  • Two-wire connector installs without adapters
  • Under 1600 RPM for quieter 3 cm cooling

Specyfikacja

Brand3ccooler.com
SeriesAD0312LX-K70
ModelAD0312LX-K70
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions30*10mm

Pytania dotyczące tego produktu

Does the 30mm 3010 AD0312LX-K70 include mounting screws or a 3-pin adapter in the box?

The listing shows only the fan itself; mounting hardware and any connector adapters are not included and must be sourced separately.

Should I choose the AD0312LX-K70 over another 30mm 12V model for my CPU cooler?

Pick this AD0312LX-K70 when your cooler needs a 30mm frame, 10mm thickness, 2-wire 12V 0.06A power and a ball bearing rated under 1600 RPM.

What does the sub-1600 RPM rating mean once the AD0312LX-K70 is installed in a real system?

The fan will spin below 1600 RPM at full 12V, delivering modest airflow suited to tight 30mm cooler stacks rather than high-performance heat loads.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.