Zyvpee
Zyvpee DS09225B12U P100 92mm 4-pin PWM case fan
92 mm PWM case fan with ball bearing, 12 V, 0.56 A, 92×25 mm, four-pin control
- TypeCase Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesDC Cooling
- 12 V 0.56 A ball-bearing motor for reliable cooling
- 4-pin PWM control adjusts speed to thermal load
- 92 × 25 mm frame fits standard 92 mm mounts
- Non-LED black design keeps builds clean and distraction-free
- 4-wire connector enables motherboard monitoring and regulation
Zyvpee 92mm PWM case fan
The Zyvpee DS09225B12U P100 is a 92mm square case fan with a 25mm thickness. It runs on 12V power and draws 0.56A through a standard 4-pin PWM connector. The ball bearing and black non-LED frame are built for straightforward DC cooling inside a chassis.
Suits 92mm mounts needing PWM control
This unit fits cases or heatsinks that have 92mm mounting holes and a 4-pin header for speed regulation. It is not for systems that only offer 3-pin voltage control or that require a different hole spacing.
92mm by 25mm frame size decides fit
The physical footprint of 92mm by 25mm is the single dimension that determines whether this fan can be installed. Verify the exact mounting pattern and clearance in your hardware before purchasing.
Najważniejsze cechy
- 12 V 0.56 A ball-bearing motor for reliable cooling
- 4-pin PWM control adjusts speed to thermal load
- 92 × 25 mm frame fits standard 92 mm mounts
- Non-LED black design keeps builds clean and distraction-free
- 4-wire connector enables motherboard monitoring and regulation
Specyfikacja
| Brand | 3ccooler.com |
|---|---|
| Series | DS09225B12U P100 |
| Model | DS09225B12U |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC Cooling |
| Dimensions | 92*25mm |
Pytania dotyczące tego produktu
How often will the ball bearing in the DS09225B12U need replacement?
Ball bearings typically last for tens of thousands of operating hours before wear requires a fan swap.
What limits continuous runtime on the P100 model?
The 12 V 0.56 A rating sets the thermal ceiling; sustained loads that push the motor near that draw will trigger throttling first.
How loud and hot does the 9225 frame get after hours of PWM operation?
At full 12 V the M418C motor draws 0.56 A, so expect moderate airflow noise and warm frame temperatures during all-day use.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001039BTC
Dostępny