Zyvpee
Zyvpee EFB0612HHA 6010 60x60x10mm 12V .25A 3Pin case fan
A 60 x 60 x 10 mm ball-bearing case fan running on 12 V and 0.25 A with a 3-pin connector, designed as a direct replacement for the Infocus LP530 chassis
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 60×60×10 mm fits tight builds
- 12 V .25 A ball-bearing motor runs cool
- Direct Infocus LP530 chassis replacement
- 3-pin DC power for simple motherboard control
- Non-LED black frame keeps interior dark
Zyvpee EFB0612HHA 6010 12V Case Fan
This Zyvpee EFB0612HHA 6010 is a 60 by 60 by 10 millimetre case fan that runs on 12 volts and draws 0.25 amps. It uses a three-pin power connector and a ball bearing for rotation. The black frame carries no LED lighting and is built as a DC square cooler for radiator or chassis airflow.
Suits 60mm three-pin mounts needing ball-bearing
Builders replacing the fan in an Infocus LP530 chassis or a similar 60 millimetre three-pin slot will find a direct fit. It is not suited for four-pin PWM headers, larger cut-outs, or builds that require addressable lighting.
60 by 60 by 10 millimetre footprint decides fit
The 60 by 60 by 10 millimetre footprint is the single specification that determines whether this fan matches the mounting holes and clearance of the target device. Verify those exact dimensions before purchase.
Najważniejsze cechy
- Compact 60×60×10 mm fits tight builds
- 12 V .25 A ball-bearing motor runs cool
- Direct Infocus LP530 chassis replacement
- 3-pin DC power for simple motherboard control
- Non-LED black frame keeps interior dark
Specyfikacja
| Series | EFB0612HHA |
|---|---|
| Model | EFB0612HHA |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*10mm |
Pytania dotyczące tego produktu
Does my motherboard need a 3-pin DC header to run this 12 V 0.25 A fan?
Yes, the fan uses a 3-pin connector that plugs directly into a standard 12 V DC fan header on the board.
Will the 60 mm square frame fit the mounting holes on my older Delta EFB0612HHA cooler?
The 60×60×10 mm dimensions match the original Delta EFB0612HHA, so the existing screw pattern lines up.
How can I confirm the ball-bearing fan is spinning at the correct speed after installation?
Check the RPM reading in BIOS or monitoring software; it should report a steady value once the 12 V supply is active.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



