Zyvpee
Zyvpee GFB0412VHF F00 40x50x34mm 12V 0.54A 6 Wires 6 Pins case fan
A 40x50x34mm 12V ball-bearing case fan with a 6-pin connector for HP spare 361621-001
- TypeCase Fan
- Bearing TypeBall
- Power Connector6 Wires
- ColorBlack
- LEDNon-LED
- Dimensions40*50*34mm
- Ball-bearing motor for longer service life
- 40×50×34 mm form factor fits tight chassis spaces
- 12 V 0.54 A rating keeps power draw low
- Six-wire six-pin connector enables advanced speed control
- Direct replacement for HP spare 361621-001
Compact 40x50x34mm case fan for HP replacement
The Zyvpee GFB0412VHF F00 is a new 12V cooling fan built to match the HP spare part 361621-001. It fits systems requiring the exact 40 by 50 by 34 millimetre footprint and a six-wire, six-pin power connector.
Ball-bearing thermals with 0.54A draw
A ball bearing supports continuous rotation while the motor pulls 0.54A at 12V. The non-LED black frame keeps visual distraction at zero, and the six-wire interface allows the host to monitor and regulate speed without extra adapters.
Six-wire pin-out matches HP 361621-001
The connector layout is the deciding factor; only boards wired for the same six-pin arrangement will recognise the fan and report its tach signal correctly. Builders needing a different pin count or voltage must select another model.
Najważniejsze cechy
- Ball-bearing motor for longer service life
- 40×50×34 mm form factor fits tight chassis spaces
- 12 V 0.54 A rating keeps power draw low
- Six-wire six-pin connector enables advanced speed control
- Direct replacement for HP spare 361621-001
Specyfikacja
| Brand | 3ccooler.com |
|---|---|
| Series | GFB0412VHF F00 |
| Model | GFB0412VHF |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 6 Wires |
| Color | Black |
| LED | Non-LED |
| Dimensions | 40*50*34mm |
Pytania dotyczące tego produktu
How do I install this 40x50x34mm fan with its 6-pin connector and which step is often missed?
Mount the fan using the 40 by 50 mm screw pattern, then plug the 6-pin connector into the matching header; the step often missed is confirming the 12 V 0.54 A pinout matches the motherboard or controller before powering on.
What maintenance will the ball-bearing fan need over time?
The ball bearing is sealed and requires no lubrication; plan to clean dust from the blades and frame every few months and replace the fan if noise or vibration increases.
What limit appears first when this 12 V 0.54 A fan runs continuously?
The 0.54 A current rating sets the thermal limit; sustained operation at full voltage will hit the motor’s temperature ceiling before the bearing wears out.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



