Zyvpee
Zyvpee KF0715H1SABR 70x15mm 12V .41A 3-pin case fan
70×15 mm case fan with 12 V .41 A 3-pin power, 4100 RPM, 34.05 CFM airflow and 37.2 dB(A) noise
- TypeCase Fan
- CompatibilityCase
- Bearing Type1 Ball, 1 Sleeve
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Delivers 34.05 CFM airflow at 4100 RPM
- Operates quietly at 37.2 dB(A) noise level
- Hybrid bearing blends one ball and one sleeve
- Compact 70 x 70 x 15 mm frame fits tight spaces
- Standard 3-pin 12 V connector draws 0.41 A
Zyvpee 70 mm 3-pin case fan
This new Zyvpee axial fan measures 70 by 70 by 15 mm and runs on 12 V at 0.41 A through a three-pin power connector. It uses a hybrid bearing with one ball and one sleeve for quiet operation at 37.2 dB(A) while delivering 34.05 CFM at 4100 RPM. The black, non-LED frame fits standard case mounting points.
Suits compact case and server builds
Installers who need a slim 15 mm profile for tight clearance in cases, servers, inverters or instrument enclosures will find the dimensions match. The fixed-voltage three-pin design does not support PWM speed curves, so builders who want automatic fan curves or addressable lighting should look at something else.
3-pin 12 V power connector decides fit
The three-pin header supplies constant 12 V power without a PWM signal, so the fan runs at its rated 4100 RPM whenever the header is energised. If the motherboard or controller only offers four-pin PWM headers, speed control will not be available and a different fan or adapter is required.
Najważniejsze cechy
- Delivers 34.05 CFM airflow at 4100 RPM
- Operates quietly at 37.2 dB(A) noise level
- Hybrid bearing blends one ball and one sleeve
- Compact 70 x 70 x 15 mm frame fits tight spaces
- Standard 3-pin 12 V connector draws 0.41 A
Specyfikacja
| Series | KF0715H1SABR |
|---|---|
| Model | KF0715H1SABR |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 1 Ball, 1 Sleeve |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 70*70*15mm |
Pytania dotyczące tego produktu
Will my motherboard need a 3-pin header to run this 12V .41A fan?
Yes, the fan uses a 3-pin power connector that plugs directly into a standard motherboard chassis-fan header.
Can I keep using my existing 3-pin fan controller with this 4100RPM model?
The fan draws .41A at 12V, so any 3-pin controller rated for at least that current will drive it without issues.
How do I confirm the fan is spinning at the rated 4100RPM after installation?
Check the RPM reading in BIOS or a hardware-monitoring utility; it should report close to 4100RPM under full voltage.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001041BTC
Dostępny