Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch bare hard drive with SAS connector visible

DELL

DELL 400-AMPN 8TB 3.5" SAS 7.2K 12Gb/s internal hard drive

SKU CH-WJ4P-9VDG8

An 8 TB 3.5 inch SAS drive spinning at 7200 RPM with a 12 Gb/s transfer rate for high-capacity desktop storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

Dell 400-AMPN 8TB SAS enterprise drive

This 8TB 3.5" SAS hard drive operates at 7200 RPM with a 12Gb/s interface. It is a non hot-swap unit supplied as a bare drive for internal desktop or server installation. The Dell part number 400-AMPN identifies the exact component for procurement tracking.

Suits arrays needing high-capacity SAS spindles

Administrators expanding SAS-based RAID or JBOD volumes where drives remain fixed after installation will match this specification. Buyers whose chassis or backplane requires hot-swap trays cannot use this drive in those bays.

12Gb/s SAS interface and 7200 RPM spindle speed

The 12Gb/s SAS link and 7.2K rotation determine sustained throughput and latency for the target workload. Verify that the host controller and backplane support 12Gb/s SAS before purchase.

Puncte forte

  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

Specificații

BrandDell
Model400-AMPN
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

Întrebări despre acest articol

What maximum throughput does the SAS 12Gb/s interface actually deliver with this 7200 RPM drive?

The 12Gb/s SAS link caps burst transfers at 12Gb/s, but sustained throughput is limited by the 7200 RPM mechanics, typically well below the interface ceiling.

Does the 3.5" non hot-swap form factor require a specific tray or caddy to mount in a Dell server bay?

Yes, the bare 3.5" drive must be secured in a compatible Dell 3.5" drive tray or caddy before it can be screwed into a server chassis bay.

How is the 400-AMPN installed in a non hot-swap bay, and which step is most often missed?

Power down the system, attach the drive to a Dell 3.5" tray, slide the assembly into the bay, connect both SAS data and power cables, then secure the tray screws — skipping the tray screws is the common error.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.