نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch bare hard drive with SAS connector visible

DELL

DELL 400-AMPN 8TB 3.5" SAS 7.2K 12Gb/s internal hard drive

SKU CH-WJ4P-9VDG8

An 8 TB 3.5 inch SAS drive spinning at 7200 RPM with a 12 Gb/s transfer rate for high-capacity desktop storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

Dell 400-AMPN 8TB SAS enterprise drive

This 8TB 3.5" SAS hard drive operates at 7200 RPM with a 12Gb/s interface. It is a non hot-swap unit supplied as a bare drive for internal desktop or server installation. The Dell part number 400-AMPN identifies the exact component for procurement tracking.

Suits arrays needing high-capacity SAS spindles

Administrators expanding SAS-based RAID or JBOD volumes where drives remain fixed after installation will match this specification. Buyers whose chassis or backplane requires hot-swap trays cannot use this drive in those bays.

12Gb/s SAS interface and 7200 RPM spindle speed

The 12Gb/s SAS link and 7.2K rotation determine sustained throughput and latency for the target workload. Verify that the host controller and backplane support 12Gb/s SAS before purchase.

أبرز المميزات

  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

المواصفات

BrandDell
Model400-AMPN
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

أسئلة حول هذا المنتج

What maximum throughput does the SAS 12Gb/s interface actually deliver with this 7200 RPM drive?

The 12Gb/s SAS link caps burst transfers at 12Gb/s, but sustained throughput is limited by the 7200 RPM mechanics, typically well below the interface ceiling.

Does the 3.5" non hot-swap form factor require a specific tray or caddy to mount in a Dell server bay?

Yes, the bare 3.5" drive must be secured in a compatible Dell 3.5" drive tray or caddy before it can be screwed into a server chassis bay.

How is the 400-AMPN installed in a non hot-swap bay, and which step is most often missed?

Power down the system, attach the drive to a Dell 3.5" tray, slide the assembly into the bay, connect both SAS data and power cables, then secure the tray screws — skipping the tray screws is the common error.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.