暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 400-AMPN 8TB 3.5" SAS 7.2K 12Gb/s internal hard drive

SKU CH-WJ4P-9VDG8

An 8 TB 3.5 inch SAS drive spinning at 7200 RPM with a 12 Gb/s transfer rate for high-capacity desktop storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

Dell 400-AMPN 8TB SAS enterprise drive

This 8TB 3.5" SAS hard drive operates at 7200 RPM with a 12Gb/s interface. It is a non hot-swap unit supplied as a bare drive for internal desktop or server installation. The Dell part number 400-AMPN identifies the exact component for procurement tracking.

Suits arrays needing high-capacity SAS spindles

Administrators expanding SAS-based RAID or JBOD volumes where drives remain fixed after installation will match this specification. Buyers whose chassis or backplane requires hot-swap trays cannot use this drive in those bays.

12Gb/s SAS interface and 7200 RPM spindle speed

The 12Gb/s SAS link and 7.2K rotation determine sustained throughput and latency for the target workload. Verify that the host controller and backplane support 12Gb/s SAS before purchase.

特長

  • 8TB capacity stores large datasets
  • 7200 RPM spindle speed delivers fast sequential access
  • SAS 12Gb/s interface provides high-throughput connectivity
  • 5-inch form factor fits standard drive bays
  • Non hot-swap design suits fixed internal installations

仕様

BrandDell
Model400-AMPN
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

この商品に関する質問

What maximum throughput does the SAS 12Gb/s interface actually deliver with this 7200 RPM drive?

The 12Gb/s SAS link caps burst transfers at 12Gb/s, but sustained throughput is limited by the 7200 RPM mechanics, typically well below the interface ceiling.

Does the 3.5" non hot-swap form factor require a specific tray or caddy to mount in a Dell server bay?

Yes, the bare 3.5" drive must be secured in a compatible Dell 3.5" drive tray or caddy before it can be screwed into a server chassis bay.

How is the 400-AMPN installed in a non hot-swap bay, and which step is most often missed?

Power down the system, attach the drive to a Dell 3.5" tray, slide the assembly into the bay, connect both SAS data and power cables, then secure the tray screws — skipping the tray screws is the common error.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。