Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular grey thermal pad 85 by 45 by 2.5 mm

Lirealar

Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 85x45x2.5mm

SKU CH-ATZB-BW0E3

High-conductivity 12.8 W/mK thermal pad sized 85 x 45 x 2.5 mm, non-conductive and reusable for GPU, CPU or laptop heatsinks

  • Thermal Conductivity12.8 W/mK

Size 85x45x2.5mm

Versiunile tăiate există, dar nu sunt disponibile aici.

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Non-conductive silicone insulates components against electrical shorts
  • Non-corrosive and non-curing formula ensures long-term stability
  • Natural viscosity allows easy installation and reusability
  • 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers

Precision Fit for Tight Gaps

This thermal pad measures 85 by 45 by 0.5 millimetres and delivers 12.8 W/mK conductivity. It suits laptop heatsinks, GPU memory modules, CPU packages and LED coolers where a thin, compliant interface is required. The silicone construction stays flexible across a wide temperature range.

Non-Conductive Drop-In Layer

The material is electrically insulating, non-corrosive, non-curing and non-toxic, so it can bridge components and heatspreaders without risk of shorting. Natural tack holds the pad in place during assembly yet allows clean removal for rework. One pad covers multiple small dies or a single larger surface.

Step Up from Standard Silicone Pads

Builders replacing factory pads rated below 12.8 W/mK will see lower junction temperatures on memory and voltage-regulator zones. The upgrade is worthwhile when the original material has dried out or when a thinner 0.5 millimetre gap demands higher conductivity than typical stock pads provide.

Puncte forte

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Non-conductive silicone insulates components against electrical shorts
  • Non-corrosive and non-curing formula ensures long-term stability
  • Natural viscosity allows easy installation and reusability
  • 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers

Specificații

Thermal Conductivity12.8 W/mK

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What thermal limit does the 12.8 W/mK pad hit first during continuous load?

The pad transfers heat at 12.8 W/mK, so the bottleneck becomes the heatsink or cooler capacity rather than the pad itself.

Does the silicone pad dry out, harden or change noise levels when run all day?

The material is non-curing and non-corrosive, so it stays flexible and silent with no pump-out or hardening over time.

Which components must already be in place for the 85 x 45 mm pad to work?

A clean mating surface on the CPU, GPU, laptop heatsink or LED cooler that matches the 85 x 45 mm footprint and 0.5 mm gap.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.