Lirealar
Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 85x45x2.5mm
High-conductivity 12.8 W/mK thermal pad sized 85 x 45 x 2.5 mm, non-conductive and reusable for GPU, CPU or laptop heatsinks
- Thermal Conductivity12.8 W/mK
Size 85x45x2.5mm
- 120x20x0.5mm
- 120x20x1.0mm
- 120x20x1.5mm
- 120x20x2.0mm
- 120x20x2.5mm
- 120x20x3.0mm
- 85x45x0.5mm
- 85x45x1.0mm
- 85x45x1.5mm
- 85x45x2.0mm
- 85x45x2.5mm
- 85x45x3.0mm
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
- High thermal conductivity of 12.8 W/mK for efficient heat transfer
- Non-conductive silicone insulates components against electrical shorts
- Non-corrosive and non-curing formula ensures long-term stability
- Natural viscosity allows easy installation and reusability
- 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers
Precision Fit for Tight Gaps
This thermal pad measures 85 by 45 by 0.5 millimetres and delivers 12.8 W/mK conductivity. It suits laptop heatsinks, GPU memory modules, CPU packages and LED coolers where a thin, compliant interface is required. The silicone construction stays flexible across a wide temperature range.
Non-Conductive Drop-In Layer
The material is electrically insulating, non-corrosive, non-curing and non-toxic, so it can bridge components and heatspreaders without risk of shorting. Natural tack holds the pad in place during assembly yet allows clean removal for rework. One pad covers multiple small dies or a single larger surface.
Step Up from Standard Silicone Pads
Builders replacing factory pads rated below 12.8 W/mK will see lower junction temperatures on memory and voltage-regulator zones. The upgrade is worthwhile when the original material has dried out or when a thinner 0.5 millimetre gap demands higher conductivity than typical stock pads provide.
주요 특징
- High thermal conductivity of 12.8 W/mK for efficient heat transfer
- Non-conductive silicone insulates components against electrical shorts
- Non-corrosive and non-curing formula ensures long-term stability
- Natural viscosity allows easy installation and reusability
- 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers
사양
| Thermal Conductivity | 12.8 W/mK |
|---|
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 85x45x0.5mm
- 12.8 W/mK
Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 85x45x1.5mm
- 12.8 W/mK
Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 120x20x0.5mm
- 12.8 W/mK
이 상품에 대한 질문
What thermal limit does the 12.8 W/mK pad hit first during continuous load?
The pad transfers heat at 12.8 W/mK, so the bottleneck becomes the heatsink or cooler capacity rather than the pad itself.
Does the silicone pad dry out, harden or change noise levels when run all day?
The material is non-curing and non-corrosive, so it stays flexible and silent with no pump-out or hardening over time.
Which components must already be in place for the 85 x 45 mm pad to work?
A clean mating surface on the CPU, GPU, laptop heatsink or LED cooler that matches the 85 x 45 mm footprint and 0.5 mm gap.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








