Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Rectangular grey thermal pad 85 by 45 by 2.5 mm

Lirealar

Lirealar Extreme Odyssey Thermal Pad 12.8 W/mK 85x45x2.5mm

SKU CH-ATZB-BW0E3

High-conductivity 12.8 W/mK thermal pad sized 85 x 45 x 2.5 mm, non-conductive and reusable for GPU, CPU or laptop heatsinks

  • Thermal Conductivity12.8 W/mK

Size 85x45x2.5mm

As versões riscadas existem, mas não estão disponíveis aqui.

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Non-conductive silicone insulates components against electrical shorts
  • Non-corrosive and non-curing formula ensures long-term stability
  • Natural viscosity allows easy installation and reusability
  • 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers

Precision Fit for Tight Gaps

This thermal pad measures 85 by 45 by 0.5 millimetres and delivers 12.8 W/mK conductivity. It suits laptop heatsinks, GPU memory modules, CPU packages and LED coolers where a thin, compliant interface is required. The silicone construction stays flexible across a wide temperature range.

Non-Conductive Drop-In Layer

The material is electrically insulating, non-corrosive, non-curing and non-toxic, so it can bridge components and heatspreaders without risk of shorting. Natural tack holds the pad in place during assembly yet allows clean removal for rework. One pad covers multiple small dies or a single larger surface.

Step Up from Standard Silicone Pads

Builders replacing factory pads rated below 12.8 W/mK will see lower junction temperatures on memory and voltage-regulator zones. The upgrade is worthwhile when the original material has dried out or when a thinner 0.5 millimetre gap demands higher conductivity than typical stock pads provide.

Pontos fortes

  • High thermal conductivity of 12.8 W/mK for efficient heat transfer
  • Non-conductive silicone insulates components against electrical shorts
  • Non-corrosive and non-curing formula ensures long-term stability
  • Natural viscosity allows easy installation and reusability
  • 85 x 45 x 2.5 mm size fits laptop heatsinks, GPU and CPU coolers

Especificações

Thermal Conductivity12.8 W/mK

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What thermal limit does the 12.8 W/mK pad hit first during continuous load?

The pad transfers heat at 12.8 W/mK, so the bottleneck becomes the heatsink or cooler capacity rather than the pad itself.

Does the silicone pad dry out, harden or change noise levels when run all day?

The material is non-curing and non-corrosive, so it stays flexible and silent with no pump-out or hardening over time.

Which components must already be in place for the 85 x 45 mm pad to work?

A clean mating surface on the CPU, GPU, laptop heatsink or LED cooler that matches the 85 x 45 mm footprint and 0.5 mm gap.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.