저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular grey silicone thermal pad 85 by 45 by .5 mm

Lirealar

Lirealar Thermal Pad 12.8 W/mK 85x45x3mm

SKU CH-TG8Y-HWEMM

High-conductivity 12.8 W/mK silicone pad sized 85×45×0.5 mm for CPU, GPU or laptop heatsinks, electrically insulating and reusable

  • Thermal Conductivity12.8 W/mK

Size 85x45x3.0mm

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • High 12.8 W/mK conductivity moves heat fast from GPU and CPU
  • Non-conductive silicone keeps shorts away from sensitive components
  • 85 × 45 × .5 mm sheet fits laptop heatsinks and LED coolers
  • Non-corrosive, non-curing material stays effective through repeated disassembly
  • Natural tack lets you position and reuse the pad without extra adhesive

Thermal Pad 12.8 W/mK

This thermal pad measures 85 by 45 by 0.5 mm and provides a thermal conductivity of 12.8 W/mK. It is designed for laptop heatsinks, GPU, CPU and LED cooler applications. The material is non-conductive, non-corrosive, non-curing and non-toxic.

Thermals and Power

The pad transfers heat efficiently between component and cooler without conducting electricity. Its insulated construction prevents short circuits while the natural viscosity keeps it in place during normal use. No curing time is required and the pad remains reusable after disassembly.

Upgrade Path

Builders replacing dried or lower-conductivity pads on compact boards will benefit from the higher 12.8 W/mK rating. The thin 0.5 mm profile suits tight gaps where thicker pads cannot fit. Users needing thicker interfaces or larger surface coverage should select a different size.

주요 특징

  • High 12.8 W/mK conductivity moves heat fast from GPU and CPU
  • Non-conductive silicone keeps shorts away from sensitive components
  • 85 × 45 × .5 mm sheet fits laptop heatsinks and LED coolers
  • Non-corrosive, non-curing material stays effective through repeated disassembly
  • Natural tack lets you position and reuse the pad without extra adhesive

사양

Thermal Conductivity12.8 W/mK

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the 85x45x0.5mm pad and what step is often missed?

Clean both surfaces, peel the protective film, place the pad without stretching it, then apply even pressure when mounting the heatsink; the step most people skip is removing both liner layers before assembly.

Will the 12.8 W/mK pad need replacement and how can I tell?

The silicone material is non-curing and non-corrosive, so it does not dry out; replace it only if the pad tears, loses its natural viscosity, or no longer makes full contact after disassembly.

What limit appears first when the pad runs under sustained load?

The 12.8 W/mK conductivity rating sets the thermal bottleneck; if the component generates more heat than the pad can transfer across its 0.5 mm thickness, temperatures will rise despite the heatsink.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.