Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Open-frame laser engraver with a blue 3.5-inch touchscreen on the side, rectangular 400 by 400 mm work area

LONGER

LONGER Ray5 10W Laser Engraver 0.06mm 400x400mm

SKU CH-FFWF-AR113

Engraves and cuts wood, metal, acrylic and leather with a 0.06mm spot, 24000mm/min speed and a 400x400mm bed

size RAY5 10W

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

400 × 400 mm Work Area

The LONGER Ray5 10W Laser Engraver provides a 400 × 400 mm working area suitable for hobbyists and small workshops processing wood, acrylic, leather and metal sheets. A 3.5-inch colour touchscreen and four transmission methods — Wi-Fi, USB, TF card and app — allow standalone operation without a permanent PC connection. It runs LaserGRBL and LightBurn on Windows, macOS and Linux.

0.06 mm Spot Size Upgrade

The 0.06 × 0.06 mm compression spot is 50 % smaller than standard lasers, concentrating energy for sharper lines and finer textures on detailed artwork. A 32-bit core motherboard replaces older 8-bit boards for smoother motion planning and steadier data handling. Buyers who need a larger bed or higher optical power for thicker stock will find this platform limiting.

Dual-Beam Sustained Output

Dual-beam technology delivers a maximum engraving speed of 24 000 mm per minute while the active position protection, overheat safeguards and current safety control manage thermal load during long cuts. The 10 W module cleanly cuts 20 mm wood and 30 mm acrylic in a single pass, maintaining consistent depth across the full bed. Continuous heavy vector work may still require external air assist for optimal edge quality.

Puncte forte

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Alte versiuni ale acestui model

2 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What are the dimensions of the 400x400mm working area and the 3.5-inch touchscreen footprint?

The engraver provides a 400mm by 400mm processing area and is controlled by a built-in 3.5-inch colour touchscreen.

How do I connect the machine for the first offline job using the TF card slot?

Save your design as G-Code on a TF card, insert the card into the slot, then select the file on the 3.5-inch touchscreen to start without a computer.

When should I clean or replace the fixed-focus laser lens to keep the 0.06mm spot sharp?

Wipe the lens with a lint-free cloth and isopropyl alcohol whenever residue appears; replace it if the 0.06mm spot becomes blurred or cutting depth drops.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.