We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open-frame laser engraver with a blue 3.5-inch touchscreen on the side, rectangular 400 by 400 mm work area

LONGER

LONGER Ray5 10W Laser Engraver 0.06mm 400x400mm

SKU CH-FFWF-AR113

Engraves and cuts wood, metal, acrylic and leather with a 0.06mm spot, 24000mm/min speed and a 400x400mm bed

size RAY5 10W

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

400 × 400 mm Work Area

The LONGER Ray5 10W Laser Engraver provides a 400 × 400 mm working area suitable for hobbyists and small workshops processing wood, acrylic, leather and metal sheets. A 3.5-inch colour touchscreen and four transmission methods — Wi-Fi, USB, TF card and app — allow standalone operation without a permanent PC connection. It runs LaserGRBL and LightBurn on Windows, macOS and Linux.

0.06 mm Spot Size Upgrade

The 0.06 × 0.06 mm compression spot is 50 % smaller than standard lasers, concentrating energy for sharper lines and finer textures on detailed artwork. A 32-bit core motherboard replaces older 8-bit boards for smoother motion planning and steadier data handling. Buyers who need a larger bed or higher optical power for thicker stock will find this platform limiting.

Dual-Beam Sustained Output

Dual-beam technology delivers a maximum engraving speed of 24 000 mm per minute while the active position protection, overheat safeguards and current safety control manage thermal load during long cuts. The 10 W module cleanly cuts 20 mm wood and 30 mm acrylic in a single pass, maintaining consistent depth across the full bed. Continuous heavy vector work may still require external air assist for optimal edge quality.

Highlights

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

Specifications

No published specifications for this item yet.

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What are the dimensions of the 400x400mm working area and the 3.5-inch touchscreen footprint?

The engraver provides a 400mm by 400mm processing area and is controlled by a built-in 3.5-inch colour touchscreen.

How do I connect the machine for the first offline job using the TF card slot?

Save your design as G-Code on a TF card, insert the card into the slot, then select the file on the 3.5-inch touchscreen to start without a computer.

When should I clean or replace the fixed-focus laser lens to keep the 0.06mm spot sharp?

Wipe the lens with a lint-free cloth and isopropyl alcohol whenever residue appears; replace it if the 0.06mm spot becomes blurred or cutting depth drops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.