Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Open-frame laser engraver with a blue 3.5-inch touchscreen on the side, rectangular 400 by 400 mm work area

LONGER

LONGER Ray5 10W Laser Engraver 0.06mm 400x400mm

SKU CH-FFWF-AR113

Engraves and cuts wood, metal, acrylic and leather with a 0.06mm spot, 24000mm/min speed and a 400x400mm bed

size RAY5 10W

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

400 × 400 mm Work Area

The LONGER Ray5 10W Laser Engraver provides a 400 × 400 mm working area suitable for hobbyists and small workshops processing wood, acrylic, leather and metal sheets. A 3.5-inch colour touchscreen and four transmission methods — Wi-Fi, USB, TF card and app — allow standalone operation without a permanent PC connection. It runs LaserGRBL and LightBurn on Windows, macOS and Linux.

0.06 mm Spot Size Upgrade

The 0.06 × 0.06 mm compression spot is 50 % smaller than standard lasers, concentrating energy for sharper lines and finer textures on detailed artwork. A 32-bit core motherboard replaces older 8-bit boards for smoother motion planning and steadier data handling. Buyers who need a larger bed or higher optical power for thicker stock will find this platform limiting.

Dual-Beam Sustained Output

Dual-beam technology delivers a maximum engraving speed of 24 000 mm per minute while the active position protection, overheat safeguards and current safety control manage thermal load during long cuts. The 10 W module cleanly cuts 20 mm wood and 30 mm acrylic in a single pass, maintaining consistent depth across the full bed. Continuous heavy vector work may still require external air assist for optimal edge quality.

Punti di forza

  • Ultra-fine 0.06mm spot for detailed engravings
  • 10W laser cuts 20mm wood and 30mm acrylic
  • 400x400mm workspace handles large projects
  • 24000mm/min speed with dual-beam technology
  • 5" touchscreen plus Wi-Fi, USB, TF, App control

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Altre versioni di questo modello

altri 2 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What are the dimensions of the 400x400mm working area and the 3.5-inch touchscreen footprint?

The engraver provides a 400mm by 400mm processing area and is controlled by a built-in 3.5-inch colour touchscreen.

How do I connect the machine for the first offline job using the TF card slot?

Save your design as G-Code on a TF card, insert the card into the slot, then select the file on the 3.5-inch touchscreen to start without a computer.

When should I clean or replace the fixed-focus laser lens to keep the 0.06mm spot sharp?

Wipe the lens with a lint-free cloth and isopropyl alcohol whenever residue appears; replace it if the 0.06mm spot becomes blurred or cutting depth drops.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.